« previous next »
Pages: [1]

Author Topic: what car can i get a 10mm head and plunger from?  (Read 3732 times)

July 31, 2005, 07:54:12 am

SMOKEYDUB

  • Veteran
  • Offline
  • ***
  • 630
what car can i get a 10mm head and plunger from?
« on: July 31, 2005, 07:54:12 am »
There are lots of scrap yards around here so im wondering where can i get a 10mm head and plunger? Is the factory 1.9 td pump a 10 mm? Anyways thanks for any help.
Logged
12mm PUMP 'O' DEATH on a 1.6L
(courtesy of GILES)

2000 NISSAN XTERRA (5 SPD)
1990 VW JETTA 20 VALVE DRAG CAR
1984 RABBIT TD 2dr (SOLD)
1.8t AEB soon around 550 whp
Reply #1July 31, 2005, 02:15:09 pm

Blades

  • Guest
what car can i get a 10mm head and plunger from?
« Reply #1 on: July 31, 2005, 02:15:09 pm »
Ford Ranger Diesel
1.6 and 1.9 IDI are 9mm
Logged
Reply #2August 01, 2005, 09:00:48 am

fspGTD

  • Veteran
  • Offline
  • ***
  • 1529
    • http://home.comcast.net/~vwgtd
what car can i get a 10mm head and plunger from?
« Reply #2 on: August 01, 2005, 09:00:48 am »
I got a 10mm VE pump from a Mid 80's Mitsubishi Pickup Truck turbo-diesel.

Also, Another peugeot pump link.
Logged
Jake Russell
'81 VW Rabbit GTD Autocrosser 1.6lTD, SCCA FSP Class
Dieselicious Turbocharger Upgrade/Rebuild Kits
Reply #3August 01, 2005, 11:42:19 am

Audi80

  • Guest
what car can i get a 10mm head and plunger from?
« Reply #3 on: August 01, 2005, 11:42:19 am »
I have 10mm plunger from Toyota pump.
Logged
Reply #4August 01, 2005, 11:56:46 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2926
    • http://www.geocities.com/vwfatmobile/
10mm pump
« Reply #4 on: August 01, 2005, 11:56:46 pm »
I've got one that came off an Audi 4000 NA diesel ... not sure if it was an automatic..
 Were the NA 1.6 automatics equiped with a 10mm pump?
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #5August 03, 2005, 03:56:49 am

Caddy-Daddy

  • User+
  • Offline
  • *
  • 36
    • http://www.caddy-clan.nl
what car can i get a 10mm head and plunger from?
« Reply #5 on: August 03, 2005, 03:56:49 am »
Some 1.9 IDI are even 8mm.

10mm can be found on VAG SDI,TDI, Fiat Croma Ddi,
Logged
Caddy's Rule
Reply #6August 06, 2005, 06:00:10 pm

moosiah

  • Junior
  • Offline
  • **
  • 106
10mm pump head
« Reply #6 on: August 06, 2005, 06:00:10 pm »
2.3 turbo Poegeot  motor ..... swap guts to vw compatable  3 bolt case..(use old na pump ).. 10 mm head and free LDA too....... :D
Logged
'81 Frankenbunny: part rabbit, sirroco, golf ,caddy cabrio ,jedda and ! ford teimpo! w a little more Audi and soon some Peogeot too!!!!
Pages: [1]
« previous next »