S-PAutomotive.com
« previous next »
Pages: [1]

Author Topic: t3/t4  (Read 1457 times)

January 23, 2009, 05:00:33 pm

dillenger1

  • Veteran
  • Offline
  • ***
  • 777
t3/t4
« on: January 23, 2009, 05:00:33 pm »
Has anyone done this with our smaller t3?Im getting curious ,as i damaged the compressor on my old one trying to rebuild it.The damn wheel was on there so tight.I was thinking i could just locate a chinese wheel and housing or just wheel.
Logged


Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.
Reply #1January 25, 2009, 03:28:37 am

UnderPSI

  • Junior
  • Offline
  • **
  • 109
t3/t4
« Reply #1 on: January 25, 2009, 03:28:37 am »
Yes. If it's a Garrett T3 you can use the back plate, compressor wheel, and compressor housing off of a TO4B or To4H1. May be a couple others as well. Just have to have the same shaft size as your T3.
Logged
Suzuki Samurai 1.6
Pages: [1]
« previous next »
 

S-PAutomotive.com