Author Topic: WTB:still looking for boost pin from 1.6td (Read 4305 times)

Clintwalker85 · « **on:** January 23, 2009, 02:21:41 am »

hey if anyone out there has a 1.6td boost pin please let me know lots done to my aaz but i just can't find that pin anywhere!!

dillenger1 · « **Reply #1 on:** January 23, 2009, 06:21:01 am »

if you can find a cummins dealer you could order it though them.It might be expensive though.I would grind your 1.9 pin,no?

GEE-BEE · « **Reply #2 on:** January 23, 2009, 09:41:50 am »

BRICKWERKS.CO.UK

Great service and they have other parts for the AAZ

Clintwalker85 · « **Reply #3 on:** January 23, 2009, 10:49:04 am »

i would grind it but if i ever had to bring it in for emissions testing i would have to find another pin,

zukgod1 · « **Reply #4 on:** January 23, 2009, 11:36:42 am »

No you wouldn't. Turn it around before you go in.

Clintwalker85 · « **Reply #5 on:** January 23, 2009, 12:35:49 pm »

ahh dident actually know you could do that...how would i know how much to grind? how deep to grind..

dillenger1 · « **Reply #6 on:** January 23, 2009, 10:27:15 pm »

Im in ohio ,we get tested and it takes alot to fail(havent done it yet)My dad tested his cummins maxxed out and it passed with colors,black mostly

RabbitGTDguy · « **Reply #7 on:** January 23, 2009, 10:35:34 pm »

I believe I have a 1.6TD boost pin since my Cummins pumps utilize the larger diameter pins...

PM me...and I'll look tomorrow.

Joe

Clintwalker85 · « **Reply #8 on:** January 24, 2009, 02:17:08 am »

if you have one that would be great!!!!! let me know

dillenger1 · « **Reply #9 on:** January 24, 2009, 08:57:07 am »

Quote from: "RabbitGTDguy"

I believe I have a 1.6TD boost pin since my Cummins pumps utilize the larger diameter pins...

PM me...and I'll look tomorrow.

Joe

sorry.didnt know

RabbitGTDguy · « **Reply #10 on:** January 24, 2009, 10:44:31 am »

yours may be different...but the cummins LDA's that I have run a slightly larger pin. You can swap to the 1.6 ones in them...but you have to tear the LDA down and replace the sleeve in which the pin rides for the smaller diameter IDI TD pin.

Joe