-
VW DIESEL INTAKES (PERFORMANCE)
by
handedyourhat
on 03 Jan, 2009 22:37
-
Would anyone be interested in purchasing one of these performance intake manifolds to make your 1.6 or 1.9 breath a whole lot better than the stock restrictive manifold. This manifold is the new dual plenem design and will keep the airflow in the intake even to all 4 cylinders instead of consentrating the air on the center cylinders on the poorly designed stock intake ... proly be lookin at $500 canadian and I would need your manifold to work with,I can make this intake for a 1.6L TD as well. This manifold is also listed on Ebay if you need better pics... [im
g][/img][/url][im
g][/img][im
g][/img][im
g][/img][im
g][/img]
-
#1
by
53 willys
on 03 Jan, 2009 23:45
-
wish you had some bigger pics....
looks like a nice piece
-
#2
by
vwmike
on 04 Jan, 2009 01:09
-
That's pretty fancy
I wonder if there would be room for a larger plenum. :?
-
#3
by
Smokey Eddy
on 04 Jan, 2009 01:34
-
Psssst, Dan, when you upload on photobucket there is a pane you open underneath "choose files to upload" and set it to 1mb.
Pm me if you have troubles.
-
#4
by
vwt4
on 04 Jan, 2009 05:53
-
Looks great but we need bigger pics!!!
-
#5
by
fdnyguy
on 04 Jan, 2009 05:59
-
Where on Ebay?
Do ya have a link?
Thanks..
-
#6
by
theman53
on 04 Jan, 2009 06:02
-
I would love to...but I am already about 1,000 US dollars over budgett :cry: , so no way am I going to dump another 500 into it if it isn't 100% nessesary. If you could help me out and tell me how to make it dual plane I would have no problem building my own though. Or if you just feel sorry for a poor fellow and want to help me out in some way I am not above that :lol:
PS looks good from what I can see
-
#7
by
spencebm
on 04 Jan, 2009 06:43
-
-
#8
by
53 willys
on 04 Jan, 2009 07:31
-
that is for sure a great looking and well built intake...for me since I have the tools to build my own I would have to say no I would not pay $500 for the intake...but somebody with no tools or time to built one would..
good luck with your project!
-
#9
by
theman53
on 04 Jan, 2009 08:04
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
-
#10
by
spencebm
on 04 Jan, 2009 08:31
-
the reserve must be about $499 and no buy it now so we can all fight over it and bid it up to a thousand!!! F&%$ this, anyone wanna lend me a TIG welder?
-
#11
by
fdnyguy
on 04 Jan, 2009 08:54
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
Does it fit a 1.6 N/A? Then ya might have a little fight.....
-
#12
by
jtanguay
on 04 Jan, 2009 11:10
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
Does it fit a 1.6 N/A? Then ya might have a little fight.....
it has D-shaped ports. it will fit the 1.6 n/a, but you might want to do some slight porting just so its not creating a lot of turbulence if you want to use this manifold.
is this one of Dave's? (935racer) with the ceramic coating inside+out
-
#13
by
935racer
on 04 Jan, 2009 11:56
-
at .99 US plus shipping I could afford it! you might have some competition spencebm :lol:
Don't worry though if it goes much more than that it is yours. Yes I am that cheap...I drive VWs don't I?
Does it fit a 1.6 N/A? Then ya might have a little fight.....
it has D-shaped ports. it will fit the 1.6 n/a, but you might want to do some slight porting just so its not creating a lot of turbulence if you want to use this manifold.
is this one of Dave's? (935racer) with the ceramic coating inside+out
No, that manifold isn't coated, and I would never sell something with such horrible welding. Its a rip off of my intake manifolds, flattering :lol:
-
#14
by
935racer
on 04 Jan, 2009 12:00
-
By the way handedyourhat, were you the fellow that asked to come down to my shop recently to see how I made these?
