Power Steering Pump off a 1.9AAZ on a 1.6N/A - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• Power Steering Pump off a 1.9AAZ on a 1.6N/A by catlin_cava on 21 Dec, 2008 16:17
• Can I use a pump off a 1.9AAZ on a 1.6 N/A? the power steering pump is seized on the jetta...
• #1 by TurboJ on 21 Dec, 2008 17:09
• I'm just in the process of ordering a new pump - the vendor says it fits, so it should..
• #2 by catlin_cava on 21 Dec, 2008 17:25
• Perfect, I'll try it this next weekend when i go work on the car again.
• #3 by andy2 on 23 Dec, 2008 17:59
• I'm quite sure 100% that they are not interchangeable as I just went through this last night :lol:.There are many reasons that it won't fit,just have a look at the pully flange offset for 1 example and the pump width.You can use the aaz pump on the 1.6 but only if you change belt system over to the AAZ serpentine.
• #4 by catlin_cava on 23 Dec, 2008 18:40
• Hmmmm, I think I found a pump for a 1.6 N/A anyways, just lucked out the neighbourg had an old jetta lol.
• #5 by TurboJ on 23 Dec, 2008 19:28
• Quote from: "andy2"

  I'm quite sure 100% that they are not interchangeable as I just went through this last night :lol:.There are many reasons that it won't fit,just have a look at the pully flange offset for 1 example and the pump width.You can use the aaz pump on the 1.6 but only if you change belt system over to the AAZ serpentine.

  
  
  You do not have to change the belt system, the pulley on the servo pump is removable and you can fit a 1.6 pulley on it.
• #6 by andy2 on 25 Dec, 2008 14:01
• The pully's are interchangeable but the pump is not.
• #7 by trent77 on 25 Dec, 2008 19:03
• Not sure why it worked for me but, I used a pump off of a cabriolet in the junk yard, all I had to do was take the pulley from my old one and put it on the new one, it works great and has for months.