-
1.9TD Crank same as 1.9TDI crank?
by
zagarus
on 09 Dec, 2008 23:30
-
Just curious if a 1.9TD (aaz) crank is the same as a TDI crank.
Just looking for options to this crank pulley upgrade for the fabled wobbly pulleys on the TD.
-
#1
by
blackdogvan
on 10 Dec, 2008 00:22
-
yes, its the same. When my pulley started its death wobble its the route I went. I believe its NW fuel injection down the road in van that can machine your crank in place to accept a tdi pulley or pop it out & have it machined to fit. There have been a few alternative methods successfully tried too.
-
#2
by
zagarus
on 10 Dec, 2008 00:24
-
which method would you think is the better one? im sure machining the stock 1.9td crank would be the most cost effective one but at the same time this is a rebuild engine so a new crank wouldn't hurt either.
-
#3
by
blackdogvan
on 10 Dec, 2008 01:00
-
I know there are others here who have tried all the options so stand by...
-
#4
by
g-spec
on 10 Dec, 2008 01:19
-
I have done a re-machined crank to accept the TDI pulley.....done by fastTD! no problems or complaints there....excellent work - this was done on my sisters car while I was rebuilding the motor after a TB broke.
My golf im running a new bolt and gear with 2 dowel pins. I didnt want to pull/rebuild the motor, so thats why I chose this method. I plan on using the same one on the motor I will be building for my corrado.
-
#5
by
rallydiesel
on 10 Dec, 2008 13:21
-
The only TDI cranks you can use as direct replacements are the 1Z and AHU. The others have an oil pump gear on them.
-
#6
by
zagarus
on 10 Dec, 2008 13:57
-
awesome thanks for the info!
-
#7
by
blackdogvan
on 10 Dec, 2008 14:32
-
The only TDI cranks you can use as direct replacements are the 1Z and AHU. The others have an oil pump gear on them.
Aww crap, sorry I should have mentioned that...
-
#8
by
zagarus
on 10 Dec, 2008 15:23
-
no worries. You have been more then helpful. I love this site, it is the only one where everyone is mature and very very very helpful.
Thanks once again everyone. Now to figure out my next step hehe.