1.6/1.9 IDI Engine Dimensions - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• 1.6/1.9 IDI Engine Dimensions by TemporarilyOffline on 01 Aug, 2007 08:37
• Can anybody give me some measurements on the 1.6/1.9IDI engine height, width, depth?
  
  I'm looking to fit an IDI into my car and need to know if its possible.
  
  - Steve
• #1 by Vincent Waldon on 24 Dec, 2008 12:26
• Christmas bump.... anyone got an engine out at the moment and can measure the approximate locations of the mounts, size of the hole, etc ?
  
  Swapping *in* a diesel is a worthy Christmas cause !!
  
  
  
• #2 by madmedix on 24 Dec, 2008 12:32
• As a matter of fact, I have a 1.6TD sitting on an engine stand right now....in the back shed...over 100 ft away and the snow is just over 3 ft deep. However, it just started raining and we'll see...
• #3 by cyrus #1 on 24 Dec, 2008 13:12
• I'm heading out right now but should be able to nab some dimensions off of my 1.6 later today.  
• #4 by burn_your_money on 24 Dec, 2008 13:34
• I happen to have a 1.6 and a 1.9 sitting in the shop behind me. I'll be back in 5 with some numbers
  
  roughly, 24" high, 24" wide and 20" long. That's without the turbo, which would be about another 3" wide
  
  The 1.9 is about an inch taller
• #5 by MJF on 24 Dec, 2008 13:37
• http://www.haywood-sullivan.com/vanagon/TDI/tdi_engine_cad_drawing_small.pdf
  
  1,6 block is 16mm lower IIRC
• #6 by Vincent Waldon on 24 Dec, 2008 14:17
• Thanks all.. the OP emailed me and I knew I could count on youse guys... sniff!!!! :cry:  :lol:
• #7 by Vincent Waldon on 24 Dec, 2008 14:26
• Quote from: "MJF"

  http://www.haywood-sullivan.com/vanagon/TDI/tdi_engine_cad_drawing_small.pdf
  
  1,6 block is 16mm lower IIRC

  
  
  
  Very cool, btw... bookmarked with thanks !!