Author Topic: 1.9 cyl head (AAZ) (Read 4000 times)

SMOKEYDUB · « **on:** November 27, 2008, 06:32:09 pm »

I bought this cylinder head for my 1.6td project. This head was never used on my car because i had a slight change in engine plans. As I mentioned in the title it is originally from a 1.9td AAZ. The cylinder head has been checked for cracks, resurfaced, Ported and polished (finished with 1000 wet sand) The front of the cylinder head has been smoothened out and polished and is fitted with new valve seals. The valves are 8mm valve stems but are in good shape and are freshly lapped. This cylinder head would be great for even non performance applications. I am not sure what I should ask for it I have alot of hours into it and think it deserves a better home. Best reasonable offer.

email: [email protected]

Jeff :twisted:

SMOKEYDUB · « **Reply #1 on:** November 29, 2008, 11:50:55 am »

BUMPAGE! :twisted:

Darkness_is_spreading · « **Reply #2 on:** November 30, 2008, 09:11:56 am »

It's hard to find a good AAZ head that isn't manufactured in mexico, this is a German head that has been improved in the areas of flow and volume.

I'd buy it but I have my biodiesel project on the go for school.

Vincent Waldon · « **Reply #3 on:** November 30, 2008, 02:56:48 pm »

Emailed ya.