Author Topic: Feeler :may have a 97 AAZ T-bone for parts (Read 5799 times)

the caveman · « **on:** November 17, 2008, 06:59:47 pm »

I have another possiblity of a 97 Jetta TD for parts . Car runs, was t-boned and body is bad anyways. I will part it if i can get enough of it sold. I won't ship a complete motor to the states but can part it to ship. If i can sell the motor, IP , turbo and trans i will buy it. car had 265,000 kms and was very well maintained. thanks

blackbird82 · « **Reply #1 on:** November 18, 2008, 01:32:01 pm »

I am in Winnipeg, how much for the IP shipped to me?

the caveman · « **Reply #2 on:** November 18, 2008, 01:41:20 pm »

I can't imagine more than $30.
If you do want it i will start to make a list for everything wanted and you'll be first.

Turbinepowered · « **Reply #3 on:** November 18, 2008, 03:59:04 pm »

Just fishing, but how much would you want for the head, down to 29670?

I wanna get in on this 1.9 head madness.

Kantdrive55 · « **Reply #4 on:** November 19, 2008, 12:23:17 am »

I would take the cluster out of it.

TD_Bunny · « **Reply #5 on:** November 19, 2008, 02:46:03 am »

Quote from: "the caveman"

I won't ship a complete motor to the states

Yeah wouldnt that be a pain!

Not posting to crap on this thread just wanted to tell anyone looking Marc is a great guy to work with and will do what he can get get you what you need. I dont have my motor yet (not his fault stupid EPA) but i would do business with him again. Sorry to hear about the car but good luck to you in your sales.

the caveman · « **Reply #6 on:** November 19, 2008, 01:51:45 pm »

Quote from: "Turbinepowered"

Just fishing, but how much would you want for the head, down to 29670?

I wanna get in on this 1.9 head madness.

Man i hate UPS.
I got one quote for $70, and another that would be faster but includes brokerage at $180. I would think that i could send it by post for around 60-80 bucks and you may not even have to pay duty.

the caveman · « **Reply #7 on:** November 19, 2008, 01:53:58 pm »

Quote from: "Kantdrive55"

I would take the cluster out of it.

you are on the list. Thanks.
Everyone :I'm not sure how soon i have to tell him, but he did say he's gone in december so i would imagine i will decide by this time next week.

vegged-out · « **Reply #8 on:** November 19, 2008, 09:49:38 pm »

I would be interested in the alternator and the whole serp belt setup , pulleys, idler, and bracket for my daughters 1.6td (alternator belts last her about 2000 km )
Michiel

the caveman · « **Reply #9 on:** November 19, 2008, 11:11:09 pm »

Quote from: "vegged-out"

I would be interested in the alternator and the whole serp belt setup , pulleys, idler, and bracket for my daughters 1.6td (alternator belts last her about 2000 km )
Michiel

Alright.

Turbinepowered · « **Reply #10 on:** November 21, 2008, 06:15:17 am »

Quote from: "the caveman"

Quote from: "Turbinepowered"
Just fishing, but how much would you want for the head, down to 29670?

I wanna get in on this 1.9 head madness.

Man i hate UPS.
I got one quote for $70, and another that would be faster but includes brokerage at $180. I would think that i could send it by post for around 60-80 bucks and you may not even have to pay duty.

Okay, so I'll be pessimistic and say $90 for shipping, but how much for the head itself from ya? That much again? More? Less?

the caveman · « **Reply #11 on:** November 21, 2008, 07:16:00 am »

Oops ,right. I would think $170 should do it.plus the shipping.

jtanguay · « **Reply #12 on:** November 21, 2008, 07:32:37 am »

i've been looking for a transmission... you don't happen to have the code do you? how much would you want for it??? it would be to swap into a mk2, but i have a cable shifter... just need the hydraulic clutch bits as well. (although i've heard of some interesting ways of just hooking up the master cyl with the original mk2 pedal...)

thanks

Turbinepowered · « **Reply #13 on:** November 21, 2008, 08:03:27 am »

Quote from: "the caveman"

Oops ,right. I would think $170 should do it.plus the shipping.

Mmm, I think I'm out. With the shipping added in that's $260, bit rich for my blood and idle desire right now. We're teetering on the edge of recession down here, don'tcha know!

I don't even have a spare engine appropriate to put it on, so I can afford to keep bargain hunting for a "core" head to rebuild and port/polish.

the caveman · « **Reply #14 on:** November 21, 2008, 10:55:05 am »

Quote from: "Turbinepowered"

Quote from: "the caveman"
Oops ,right. I would think $170 should do it.plus the shipping.

Mmm, I think I'm out. With the shipping added in that's $260, bit rich for my blood and idle desire right now. We're teetering on the edge of recession down here, don'tcha know!

I don't even have a spare engine appropriate to put it on, so I can afford to keep bargain hunting for a "core" head to rebuild and port/polish.

I have one that all the valve are bent. The rest of the head is okay. I cpuld strip it down and i'll sell it for $75 plus the shipping would be alot less also, possibly as little as 50 quattloos

Author Topic: Feeler :may have a 97 AAZ T-bone for parts (Read 5799 times)

TD_Bunny