Any D24T guys here?? - page 2 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• #15 by TurboJ on 04 Jan, 2009 04:54
• I don't know anything about VE6 pumps, but I had a quick look at Finnish forums:
  Apparently you can fit a 5,9l Cummins head, or one from any number of
  Perkins, MAN, Iveco, DAF and New Holland. Those should all have 12 mm plunger heads. Hopefully that helps..
• #16 by mdonau on 04 Jan, 2009 05:08
• Quote from: "TurboJ"

  I don't know anything about VE6 pumps, but I had a quick look at Finnish forums:
  Apparently you can fit a 5,9l Cummins head, or one from any number of
  Perkins, MAN, Iveco, DAF and New Holland. Those should all have 12 mm plunger heads. Hopefully that helps..

  
  
  that doesn't help, the pump ist of the rare left-turning type, i have not seen any other engines than the VW/Audi/Volvo 5 and 6 cylinder using that kind.
• #17 by vwjunkie53 on 05 Jan, 2009 11:24
• There must be some parts that swap over to it.  I understand Giles can build a hot rod D24 pump...
  
  Jason