Author Topic: how does this turbo map look? (Read 3012 times)

monomer · « **on:** November 11, 2008, 11:54:47 pm »

For a 1.6td build (turbo bottom end, 8v turbo log mani - 38mm wastegate)

monomer · « **Reply #1 on:** November 12, 2008, 06:07:16 pm »

none of the turbo guys are gonna chime in?

jackbombay · « **Reply #2 on:** November 12, 2008, 06:53:34 pm »

The pressure ratio is not particularly high, above 3 is what you should be looking for.

Is the X scale cubic meters? Do you have a higher res image of the map?

If you can confirm what the X scale is I can plot a few points on the map for you.

monomer · « **Reply #3 on:** November 12, 2008, 08:32:39 pm »

thats a screendump from a pdf

anyone know where to host a pdf?

Volumetric Flow m3/min is labeled on the bottom

flapjack · « **Reply #4 on:** November 14, 2008, 02:55:33 pm »

I can host it for you
email it to
[email protected]

monomer · « **Reply #5 on:** November 14, 2008, 04:04:20 pm »

flapjack · « **Reply #6 on:** November 14, 2008, 04:47:01 pm »

click for TURBO PDF

and here is a slightly better screenshot of it

monomer · « **Reply #7 on:** November 17, 2008, 09:07:36 pm »

any better?

monomer · « **Reply #8 on:** November 19, 2008, 06:00:10 pm »

^ANYONE?

zukgod1 · « **Reply #9 on:** November 19, 2008, 06:05:21 pm »

Drop jackbombay a PM. He's pretty good with maps.

Jet A · « **Reply #10 on:** November 19, 2008, 06:53:05 pm »

Id run it.

Should have plenty of range for your motor.

monomer · « **Reply #11 on:** November 19, 2008, 08:33:22 pm »

Quote from: "Jet A"

Id run it.

Should have plenty of range for your motor.

$300 NEW...

blkboostedtruck · « **Reply #12 on:** November 19, 2008, 09:57:58 pm »

i've ran one but on a gasser! it is a quick spooling turbo!
but i don't think the turbo's last very long? when i got my truck it had one on it! and it also had 3 trashed core's with it for parts! and even the one that was on it took a dump! so i redone the manifold so it would fit a K26 and i never had a problem since!
Duane

monomer · « **Reply #13 on:** November 20, 2008, 05:03:55 pm »

Quote from: "blkboostedtruck"

i've ran one but on a gasser! it is a quick spooling turbo!
but i don't think the turbo's last very long? when i got my truck it had one on it! and it also had 3 trashed core's with it for parts! and even the one that was on it took a dump! so i redone the manifold so it would fit a K26 and i never had a problem since!
Duane

hmmmmm, my other garrett has lasted 400k miles

sounds like you have problems...

zukgod1 · « **Reply #14 on:** November 20, 2008, 05:06:35 pm »

Quote from: "monomer"

sounds like you have problems...

That goes without saying! :lol: :lol: :lol: