Author Topic: Stupid Head stud Question (Read 2041 times)

AdAm84 · « **on:** October 27, 2008, 07:28:36 pm »

Okay, i'm sure the answer to my question is here somewhere but here it goes. I have an '84 1.6n/a I'm gonna do a rebuild and turbocharge it. SO therefore i'm gonna go with headstuds. Is this thing 11mm or 12mm? If its 12mm is the ARP # 251-4701? I want to be sure before I order parts. (need to get as many parts before rebuild as possible since its my daily driver)

maxfax · « **Reply #1 on:** October 27, 2008, 08:19:56 pm »

You're 84 should be 12mm bolts... ('82 ish was the changeover)
And yes that should be the part number for the studs you need....

Dakotakid · « **Reply #2 on:** October 27, 2008, 08:58:58 pm »

If no one exchanged the engine in the past...you should have a JK code block and probably an F designate head....12 mm.

AdAm84 · « **Reply #3 on:** October 28, 2008, 03:35:47 pm »

Sweet. That answers my question. I figured thats what it was but wanted to be sure since studs are like $130 :shock:

maxfax · « **Reply #4 on:** October 28, 2008, 04:33:19 pm »

Have you checked around ebay?? I swear I saw a set on there for $100 with free shipping..... COulda been smoking crack too... :shock:

Author Topic: Stupid Head stud Question (Read 2041 times)

AdAm84

AdAm84