« previous next »
Pages: [1]

Author Topic: mk1 1.6D n/a engine mount  (Read 5530 times)

October 23, 2008, 01:52:55 pm

zozie

  • Junior
  • Offline
  • **
  • 122
    • Rotoconcept Robotics
mk1 1.6D n/a engine mount
« on: October 23, 2008, 01:52:55 pm »
Can anyone give me some info about changing the engine mount beside the timing belt? I just ordered the mount,  will have it tomorrow. Wanna see if I can change ot on the weekend. AAHHH plus I gotta change the fuel tank as well.
thanx
Logged
Reply #1October 23, 2008, 03:15:13 pm

blkboostedtruck

  • Veteran
  • Offline
  • ***
  • 1535
mk1 1.6D n/a engine mount
« Reply #1 on: October 23, 2008, 03:15:13 pm »
it has to be pressed out! and the bracket does has to be off the motor!
i have done it different 2 times i've cut the out side and removed it that way and rewelded back once i clamped it back together! i did it that way because i don't have access to a press!
Duane
Logged
injector rebuilds call  414-840-1395 for faster service not on line much!
'66 variant 1500S
'81 2dr n/a 1.6 diesel rabbit 8"lift 260K R.I.P.
'81 caddy gas 1.8 turbo/stroker W/N.O.S.
'81 caddy 1.9 turbo diesel
'82 caddy gas 1.8 G60
 3 jettas '82' '04 '14TDI
+1 rabbit,03 HD sc.eag. duece,46,&5
Reply #2October 23, 2008, 04:35:35 pm

AdAm84

  • Guest
mk1 1.6D n/a engine mount
« Reply #2 on: October 23, 2008, 04:35:35 pm »
Make sure the bracket isn't cracked. I had to have mine TIG'ed cause it was cracked in two places. Its a real pain but take your time.
Logged
Reply #3October 23, 2008, 07:00:27 pm

zozie

  • Junior
  • Offline
  • **
  • 122
    • Rotoconcept Robotics
mk1 1.6D n/a engine mount
« Reply #3 on: October 23, 2008, 07:00:27 pm »
Well I do have acces to a press so we'll see.....
\Thanx
Logged
Pages: [1]
« previous next »