-
last chance AAZ block and head
by
the caveman
on 13 Oct, 2008 11:34
-
If nobody wants it ,the short block is going for scrap metal at the end of the week. If anybody wants to rebuild one,i got an AAZ block and head cheap. Crank nose of course is shot ,but i can supply a brand new TDI pulley to be machined to it. Will need rebore,new pistons rods and valves. Compression was good a few weeks before so head surface, guides are probably fine.
Block -$100 + 25 for TDI pulley
Head- $75
both for $150
may be only for someone to pick up.
everything in CND funds and of course doesn't include shipping,handling
thanks
-
#1
by
the caveman
on 20 Oct, 2008 11:41
-
bastard move to get back at the top
-
#2
by
zukgod1
on 20 Oct, 2008 13:01
-
I would take the head if you weren't so damn far away.
-
#3
by
rallydiesel
on 20 Oct, 2008 14:34
-
I would take the block if you weren't so damn far away!
-
#4
by
the caveman
on 20 Oct, 2008 14:43
-
I know distance is a real problem that makes it not worth it. I hate to just chuck it, but i really don't any more room.
-
#5
by
Quantum TD
on 20 Oct, 2008 15:38
-
What are the possible shipping options?
-
#6
by
the caveman
on 20 Oct, 2008 16:05
-
I don't know what the term is but my part time helper has a cousin who works where they fill empty trucks on their way back where ever. for the long block he said it would be as low as 250 but up to 450. problem is this doesn't include brokerage which could be 100. a short bock would be maybe 100 off the estimate ?? as long as your not in a hurry. i'm going to call some brokerage houses now to try to get an idea.
-
#7
by
saurkraut
on 20 Oct, 2008 16:11
-
How about a shipping guess to zip: 54016
-
#8
by
the caveman
on 20 Oct, 2008 16:20
-
hey saurkraut- shipping maybe 150-200 +110 brokerage for the short block. for the good 1.7 i have, figure 400 +140 brokerage. If i had the time and because i run on WVO and doesn't cost me anything for fuel i'd almost deliver,if i had any time..... It'd be better for some one in Canada, because of the brokerage, but then again nothing special about a 1.9 here
-
#9
by
saurkraut
on 20 Oct, 2008 17:07
-
How about a shipping guess to zip: 54016
Sorry, for the head only. If neccessary, you can stip it, cam, valves, etc..
-
#10
by
the caveman
on 20 Oct, 2008 18:40
-
I think if i strip it i could send it by post. probably cost 50-70 CND and no broker to deal with !
-
#11
by
burn_your_money
on 20 Oct, 2008 18:51
-
I've shipped complete heads less the camshaft using canada post. No problems. Ranged from $50-$75 to the states
-
#12
by
blkboostedtruck
on 20 Oct, 2008 22:26
-
i had one AAZ head shipped from blacksmokin'diesel witch had everything but the turbo for 65bucks!
Duane
-
#13
by
the caveman
on 20 Oct, 2008 23:22
-
as far as i know it's only the valves that are shot. it may be better for anybody for me to take it apart so as not to ship any bad parts.
-
#14
by
Smokey Eddy
on 21 Oct, 2008 19:35
-
damn
i just spent lots on an aaz head...
**** my life .... :cry: