Author Topic: picture reqest, Valve side TDI cylinder Head  (Read 3882 times)

September 26, 2008, 07:49:47 pm

kane66

  • Junior

  • Offline
  • **

  • 131
picture reqest, Valve side TDI cylinder Head
« on: September 26, 2008, 07:49:47 pm »
Like the title states I'm just looking for a picture of the valve side of the tdi cylinder head. I've searched all over google for one, and even though I've found a lot of top down views I have yet to find one showing the valves and injections port. I was wondering if some one could please post a picture, preferable a close up of just one bank.. with the injector installed. Thanks a lot in advance for any help.
1985 Jetta WBE

Reply #1September 27, 2008, 07:52:28 am

jimfoo

  • Veteran

  • Offline
  • ***

  • 2110
    • http://www.66rover.com
picture reqest, Valve side TDI cylinder Head
« Reply #1 on: September 27, 2008, 07:52:28 am »
Sorry, no injector, but...
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily

Reply #2September 27, 2008, 09:43:18 am

jtanguay

  • Veteran

  • Offline
  • ***

  • 6879
picture reqest, Valve side TDI cylinder Head
« Reply #2 on: September 27, 2008, 09:43:18 am »
not the greatest pics, but head is complete.




This is how we deal with porn spammers! You've been warned.

Reply #3September 27, 2008, 09:49:42 am

kane66

  • Junior

  • Offline
  • **

  • 131
picture reqest, Valve side TDI cylinder Head
« Reply #3 on: September 27, 2008, 09:49:42 am »
I'm assuming that the hole between the valves is were the injector goes.
1985 Jetta WBE

Reply #4September 27, 2008, 08:41:55 pm

jimfoo

  • Veteran

  • Offline
  • ***

  • 2110
    • http://www.66rover.com
picture reqest, Valve side TDI cylinder Head
« Reply #4 on: September 27, 2008, 08:41:55 pm »
Yep, it doesn't stick out very far.
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily