-
#345
by
Dakotakid
on 17 Jun, 2012 00:58
-
Did vinegar cause that rust? Err.....was it strawberry?
-
#346
by
theman53
on 17 Jun, 2012 12:33
-
All the carnage and you guys actually read...LOL
Rust was caused as I kept it outside when I saw there was no easy way to resurect this one.
-
#347
by
libbydiesel
on 17 Jun, 2012 12:37
-
That's obviously a yeast infection.
-
#348
by
theman53
on 17 Jun, 2012 12:42
-
thank you sir...I just spit on my monitor a little.
I waited to pull and post this stuff when I wouldn't be such an idiot about it and could take a joke. Mission accomplished. I don't feel tender about this at all now. I actually feel better as all the stuff I did *besides the extra heat* didn't hurt this engine at all. All of the main and rod bearings look unharmed. Next time I know if I hear a little bit of a slight knock to shut it down and do not restart.
-
#349
by
theman53
on 25 Jun, 2012 21:27
-
-
#350
by
libbydiesel
on 26 Jun, 2012 11:01
-
Wow, that's a nice artifact.
-
#351
by
CrazyAndy
on 26 Jun, 2012 12:07
-
Well that makes me nervous on running ARCO's in my AAZ.
-
#352
by
shwak23
on 29 Jun, 2012 16:44
-
I would use photobucket. As long as you don't move the pictures from album to album once you post them somewhere.
Sent from my DROID X2
-
#353
by
1.9aaz
on 22 Jul, 2012 22:56
-
Well that makes me nervous on running ARCO's in my AAZ.
I have them too and run a lot of boost/fuel and have had no problems. They are even skirt/top coated! They are OEM for Isuzu I believe. Not to worry,
-
#354
by
CarlosA
on 23 Jul, 2012 20:43
-
I have that same broken spot on the bottom of a cylinder on an engine I just got to rebuild .. think its useable that way? I wasn`t sure so kinda gave up for a bit.
-
#355
by
theman53
on 23 Jun, 2013 16:40
-
I was putting together my other 1.6 for this car and while rummaging for parts I found the leftover pieces of Precup from this engine. Put them up to the magnet and they are not magnetic. This tells me they were the Inconel precups. I would like to make this note as others have said that the Steel ones were better. So this failure was the Inconel precup.
For the record, I got lucky and the new head is the Steel/magnetic precups.