Author Topic: I've got a cracked 1.6turbo block Plenty of other good parts (Read 4213 times)

Riverfurm · « **on:** September 24, 2008, 06:36:15 pm »

But I have a good crank, rods and pistons. I believe the crank is standard but the piston are 2nd oversize 76.98 The engine was a turbo solid lifter head (Code MF). No head I reused that. The engine had about 40,000 miles on it since last rebuild.

I also have an 86 1.6 NA engine that has about 210,000 miles on it. Hyd. head, complete IP, brackets, flywheel (it had AC) still together.

Email me with your needs and make me an offer.

[email protected]

VW_Commuter · « **Reply #1 on:** September 24, 2008, 08:50:59 pm »

How much do you want for the crankshaft?

Riverfurm · « **Reply #2 on:** September 25, 2008, 05:43:37 am »

How about $50 plus shipping. I take PayPal.

dieselgeek72 · « **Reply #3 on:** September 26, 2008, 10:35:04 am »

I'm looking for a td oil feed return line. Have one?

Riverfurm · « **Reply #4 on:** September 26, 2008, 07:08:42 pm »

Sorry reused that on the new engine.

erdmankw · « **Reply #5 on:** March 01, 2009, 02:55:27 am »

how much do you want for the rods and pistons

subsonic · « **Reply #6 on:** March 01, 2009, 08:55:11 am »

Did you use new pistons on the rebuild, if so, who is the maker? Rods all redone? resized etc..? How did you crack the block?

dieselherb1 · « **Reply #7 on:** March 01, 2009, 10:37:24 am »

TD Intake, exhaust manifold?

Rabbit on Roids · « **Reply #8 on:** March 01, 2009, 02:20:34 pm »

ive got a set of TD manifolds i might part with for the right price. but honestly i would rather trade them for something else i need. i honestly have no use for them as i have a TDi turbo and a gasser intake.

JerryGTD · « **Reply #9 on:** March 03, 2009, 12:22:32 pm »

I am interested in the oversized pistons if they are still available. Price?

Author Topic: I've got a cracked 1.6turbo block Plenty of other good parts (Read 4213 times)

Rabbit on Roids