Author Topic: SOLD FS: 1.9 m-TDI 0-miles SOLD (Read 6127 times)

ezekiel · « **on:** September 20, 2008, 07:45:33 pm »

SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD

Selling the TDI engine I've been working on for about 2 years now.

It WAS a 1.9 AAZ TD, it was converted to TDI when I couldn't find oversized TD pistons, but could easily find ALH pistons.

I'm going to try and list everything I can remember off the top of my head:

-Neural brand .5over AHL pistons.
-Rods were cleaned, checked, and new bushings put in
-crank was checked and polished
-new crank and rod bearings (kolbenschmidt, 6 piece mains)
-rebuilt TDI head (from the dude on TDIclub, the head is beautiful)
-all the gaskets have been replaced
-new pan with metal baffle/scraper gasket
-new timing belt, tensioner, and crank gear
-TDI injectors w/ Sprint 520s
-new oil pump
-Valve cover and proper injection lines are in my possession

iffy things:
-AAZ pump is unknown condition, bought it off eBay, never ran it on anything, also needs to be modified to TDIm, but I have a Cummins 4B pump to go with it, so you can pull the camplate from that. Also have a new 11mm pump head to put on too
-crank nose is obviously AAZ, but it is in good un-wobbled condition, it has a new bolt, properly torqued, so unless you're putting A/C on it, you will have zero problems, and even if you do put A/C on it, you probably won't have problems still.
-no turbo
-no intake manifold (I can include the G60 manifold I have, though, but the ports will need to be opened up)
-because it's an AAZ block and crank, it doesn't have the TDI crank sensor, therefor it cannot be used as a TDI unless you add an external crank angle sensor.

Asking $1200
Transmission is SOLD

thanks

will ship freight at buyers expense, local pickup obviously preferred.

reply here, PM, or email xerography11 [at] yahoo [dot] com

--Justin

ezekiel · « **Reply #1 on:** September 20, 2008, 07:51:26 pm »

I also have a CTN 02A transmission that I'm willing to sell, can work out a price for both if interested.

RabbitGTDguy · « **Reply #2 on:** September 20, 2008, 08:27:18 pm »

This is a good deal for someone looking for a motor rebuilt with GOOD quality parts. I can tell you that the parts add up in price but that they are worth the piece of mind! *can attest to that with the mk1 mTDI build and the current b3 build*.

Someone will snag this....

Fuslit on here may have the misc. pieces someone needs to finish this as he has a 1z/AHU motor that he is going to go ahead and part out. Parts like the valve cover, an oil pump...even a true 1z/AHU crank....he would have those if someone wanted to buy them to finish this off with TDI parts

Joe

ezekiel · « **Reply #3 on:** September 22, 2008, 08:00:18 pm »

bump

ezekiel · « **Reply #4 on:** November 15, 2008, 01:32:24 pm »

price dropped to $1500

now includes the CTN Transmission

and made some edits that are in italics

new oil pump
proper injector lines
valve cover

thanks!

--Justin

jtanguay · « **Reply #5 on:** November 15, 2008, 01:43:14 pm »

if anyones thinking of getting an m-TDI, this is the way to go... deals like this just don't come up very often, and i'm sure he has well over $1500 into this!!!

i have well into $3500+ into mine, and thats without a transmission!!!

burn_your_money · « **Reply #6 on:** November 15, 2008, 04:25:04 pm »

I wish you were closer....

rallydiesel · « **Reply #7 on:** November 15, 2008, 04:29:28 pm »

Very good deal.

ezekiel · « **Reply #8 on:** November 15, 2008, 05:08:15 pm »

Quote from: "burn_your_money"

I wish you were closer....

I know it wouldn't make it that much easier as far as cost, but I've got friends in Canadia that I'd be willing to drive the 3 hours to see, and could freight it while in Canadia, so the border wouldn't have to be dealt with

but it'd still be Vancity to Ontario. :x

ezekiel · « **Reply #9 on:** February 21, 2009, 05:50:28 pm »

I'm listing this again since I can't think of any use for it anymore. I can't even get my 1.6TD to run :roll:

As such, I've dropped the price again, I know the economy blows, but maybe someone is in the market.

--Justin

Luckypabst · « **Reply #10 on:** February 21, 2009, 07:35:25 pm »

Could you get an estimate to haul the thing to SoCal, either 92627 or 93545?

Thanks
Chris

ezekiel · « **Reply #11 on:** February 21, 2009, 11:09:03 pm »

I'll figure that stuff out and leave the office lady at my work an email to see if she can get me a quote.

Can it be shipped to somewhere with a forklift or loading dock?

patracy · « **Reply #12 on:** February 22, 2009, 09:57:08 am »

Could I get a quote as well shipped to 30339. Commercial loading dock.

Edit: without the transmission.

ezekiel · « **Reply #13 on:** February 22, 2009, 01:50:01 pm »

I just checked vwmotors on eBay to see what they charge for freight, the 1.6td in my caddy came from them.

They are charging $350-450 to the lower 48. Plus $100 if it's residential.

I'm going to say $350 to CA if it's to a place with a forklift.

$400 to Georgia.

That should cover making the pallet as well.

If it's less I'll refund the difference, if it's more I'll eat the difference.

--Justin

RabbitJockey · « **Reply #14 on:** February 22, 2009, 03:00:54 pm »

i believe i have the original aaz head from this motor

Author Topic: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD* (Read 6127 times)

Author Topic: SOLD FS: 1.9 m-TDI 0-miles SOLD (Read 6127 times)