Author Topic: Like new 1.6TD Intake Manifold- Pictures (Read 7867 times)

subsonic · « **on:** September 14, 2008, 02:26:23 pm »

........Sold to Conor.........

I have a 1.6TD intake manifold for sale that I have been working on. It has been hot tanked to clean the crap off it. I have also spent a while going to town on it with a wire wheel. When I had it all cleaned down to the aluminum and degreased again, I gave it a blast of high temp aluminum engine paint. Results? See for your self. Sure would look nice on your engine build :wink: $75.00

I will have another one for sale in a week or so.

blkboostedtruck · « **Reply #1 on:** September 14, 2008, 03:04:50 pm »

that looks pretty!
somebody should snatch that up?
subsonic a good guy to buy from! i'll vouch for him!
Duane

jtanguay · « **Reply #2 on:** September 14, 2008, 05:36:16 pm »

and a really sweet looking intake manifold

look at the high attention to detail!

subsonic · « **Reply #3 on:** September 14, 2008, 05:41:41 pm »

Thanks Duane. I'll pass it forward and say I would buy from you , part unseen, if you said it was good. No question.

Now we should all go into the woods and bang drums around a camp fire for more manly bonding. :lol:

blkboostedtruck · « **Reply #4 on:** September 14, 2008, 07:03:41 pm »

Quote from: "subsonic"

Thanks Duane. I'll pass it forward and say I would buy from you , part unseen, if you said it was good. No question.

Now we should all go into the woods and bang drums around a camp fire for more manly bonding. :lol:

sure if you promis not to pinch my but cheek! :shock: L.O.L.
Duane

jtanguay · « **Reply #5 on:** September 14, 2008, 08:27:08 pm »

Quote from: "blkboostedtruck"

Quote from: "subsonic"
Thanks Duane. I'll pass it forward and say I would buy from you , part unseen, if you said it was good. No question.

Now we should all go into the woods and bang drums around a camp fire for more manly bonding. :lol:

sure if you promis not to pinch my but cheek! :shock: L.O.L.
Duane

:lol:

subsonic · « **Reply #6 on:** September 15, 2008, 07:03:04 am »

Not a problem!!!

I may pinch some beer out of your cooler though :lol:

blkboostedtruck · « **Reply #7 on:** September 15, 2008, 03:49:50 pm »

Quote from: "subsonic"

Not a problem!!!

I may pinch some beer out of your cooler though :lol:

ok kewl!
but i quit drinking 4 years ago! so i don't keep beer in the fridge i would have to get some for you tho!
drunk drivings were getting to expensive so i just quit!
Duane

Turbinepowered · « **Reply #8 on:** September 16, 2008, 02:35:24 am »

Quote from: "blkboostedtruck"

Quote from: "subsonic"
Not a problem!!!

I may pinch some beer out of your cooler though :lol:

ok kewl!
but i quit drinking 4 years ago! so i don't keep beer in the fridge i would have to get some for you tho!
drunk drivings were getting to expensive so i just quit!
Duane

Man, wish the college kids around here had your sensibility. They just keep looking for more ways to cheat the tests.

On topic (That has nothing to do with butts, beer or bonding

) that is a sweet looking manifold. Too bad I don't need one, but free bumpage.

conor · « **Reply #9 on:** September 16, 2008, 07:57:28 am »

...interested, as it sure would go nice with my newly painted block (por-15 kit)...

How far off of 95 are you? I think i'm heading up to Rockland, ME this weekend to pick up some rover parts with a friend, so I might be able to stop by and pick it up if its not too far (and you're around of course).

Cheers,

Conor

subsonic · « **Reply #10 on:** September 16, 2008, 10:51:31 am »

I am 10 min off 95. 1st exit going North after the york toll plaza. Wells/Sanford exit. I have sundays off, and leave for work by 10am on Sat. I will send you my address and phone # by pm.

Jim

conor · « **Reply #11 on:** September 17, 2008, 06:06:31 am »

Sounds good. I'll be in touch later this week to figure out a good time.

Cheers,
Conor

subsonic · « **Reply #12 on:** September 17, 2008, 06:43:36 am »

OK , I will list it as sale pending.

jimbote · « **Reply #13 on:** September 19, 2008, 06:43:40 pm »

if this falls through I'll take it!!!

subsonic · « **Reply #14 on:** September 19, 2008, 09:16:07 pm »

Sale on 2nd manifold pending to devarnish from vortex.