I’m trying to clean out my inventory while also drumming up some funds for my now needed replacement TDI engine so I have the following available:
Photos of any of these are available upon request. I will try to get these as soon as possible.
1.6 TD Hydraulic Head with cam, valve cover, injectors. - $200 obo
3 x 1.6 TD Pistons and Connecting Rods - $50 obo
4 x 1.6 TD Connecting Rods - $30 obo
1 x Air Conditioning Compressor - $20 obo
1 x 1.6 long runner intake (often used on 1.9 AAZ into Vanagon installations) - $15 obo
1 x 1.6 NA exhaust manifold - $10 obo
Set of H&R Sport Springs (low mileage), slight lowering (about 1” all the way around) - $35 obo
1 x Diesel Passenger Side Engine Mount - $10 obo
1 x Coolant Reservoir - $10 obo
1 x Water Pump - $20 obo
1 x MK1/MK2 CV Boot Kit (100mm flange) - $10 obo
Pair of Smoked MK2 Tail Lights (slight blemish in smoking) - $20 obo
Set of 13” Rial Basketweave Whees 4 x 100, lighweight - $200 obo
1.9L AAZ diesel block, less than 2000 miles - $75 obo
1.9L AAZ diesel crank - $50 obo
All prices subject to change/offer…let me know what you’re willing to offer and I will let you know if it’s doable.
Mikey
1.9L AAZ diesel block, less than 2000 miles - $75 obo
1.9L AAZ diesel crank - $50 obo
Do you have a 1.9L AAZ head that you can part out? You can PM me or post here.
What is the condition of the 1.9L block? It isn't one of the blocks with a gaping hole, right?
I know someone who may be interested.
Thanks,
Mark
Do you have a 1.9L AAZ head that you can part out? You can PM me or post here.
What is the condition of the 1.9L block? It isn't one of the blocks with a gaping hole, right? I know someone who may be interested.
The head was lost when it came in close personal contact with the top of a piston and a poorly timed belt...alas, it was a loss and was sold to Dr. Diesel for research purposes.
The block is in good shape to the best of my knowledge with very low miles on it (around 2K I think, yeah, very low). I have a few interested folks and I think the shipping of the block north of the border may make it cost prohibative. If you friend is in the US, then I may be able to help better.
Mikey
The head was lost when it came in close personal contact with the top of a piston and a poorly timed belt...alas, it was a loss and was sold to Dr. Diesel for research purposes.
The block is in good shape to the best of my knowledge with very low miles on it (around 2K I think, yeah, very low). I have a few interested folks and I think the shipping of the block north of the border may make it cost prohibative. If you friend is in the US, then I may be able to help better.
Mikey
Thanks for the details. I have a US address so that's no problem. Does the block have any internal parts?
Mark
The block was sold today...sorry!!!!