Various Parts for Sale...cleaning inventory

[Mikeyworks]

I’m trying to clean out my inventory while also drumming up some funds for my now needed replacement TDI engine so I have the following available:

Photos of any of these are available upon request. I will try to get these as soon as possible.

1.6 TD Hydraulic Head with cam, valve cover, injectors.  - $200 obo

3 x 1.6 TD Pistons and Connecting Rods - $50 obo
 
4 x 1.6 TD Connecting Rods - $30 obo

1 x Air Conditioning Compressor - $20 obo

1 x 1.6 long runner intake (often used on 1.9 AAZ into Vanagon installations) - $15 obo

1 x 1.6 NA exhaust manifold - $10 obo

Set of H&R Sport Springs (low mileage), slight lowering (about 1” all the way around) - $35 obo

1 x Diesel Passenger Side Engine Mount - $10 obo

1 x Coolant Reservoir - $10 obo

1 x Water Pump - $20 obo

1 x MK1/MK2 CV Boot Kit (100mm flange) - $10 obo

Pair of Smoked MK2 Tail Lights (slight blemish in smoking) - $20 obo

Set of 13” Rial Basketweave Whees 4 x 100, lighweight - $200 obo

1.9L AAZ diesel block, less than 2000 miles - $75 obo

1.9L AAZ diesel crank - $50 obo

All prices subject to change/offer…let me know what you’re willing to offer and I will let you know if it’s doable.

Mikey

[mattmey]

check PM

[malone]

1.9L AAZ diesel block, less than 2000 miles - $75 obo

1.9L AAZ diesel crank - $50 obo

Do you have a 1.9L AAZ head that you can part out? You can PM me or post here.

What is the condition of the 1.9L block? It isn't one of the blocks with a gaping hole, right? I know someone who may be interested.

Thanks,
Mark

[Mikeyworks]

Do you have a 1.9L AAZ head that you can part out? You can PM me or post here.

What is the condition of the 1.9L block? It isn't one of the blocks with a gaping hole, right? I know someone who may be interested.

The head was lost when it came in close personal contact with the top of a piston and a poorly timed belt...alas, it was a loss and was sold to Dr. Diesel for research purposes.

The block is in good shape to the best of my knowledge with very low miles on it (around 2K I think, yeah, very low).  I have a few interested folks and I think the shipping of the block north of the border may make it cost prohibative.  If you friend is in the US, then I may be able to help better.

Mikey

[malone]

The head was lost when it came in close personal contact with the top of a piston and a poorly timed belt...alas, it was a loss and was sold to Dr. Diesel for research purposes.

The block is in good shape to the best of my knowledge with very low miles on it (around 2K I think, yeah, very low).  I have a few interested folks and I think the shipping of the block north of the border may make it cost prohibative.  If you friend is in the US, then I may be able to help better.

Mikey

Thanks for the details. I have a US address so that's no problem. Does the block have any internal parts?

Mark

[Mikeyworks]

The block was sold today...sorry!!!!