Need some tins and bits - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• Need some tins and bits by Turbinepowered on 12 Aug, 2008 21:08
• I need a backing plate for the timing belt cover, that metal piece that goes against the block on the crank pulley end of the engine.
  
  Need water pump and crankshaft pulleys from a Quantum turbo diesel, preferably the later water pump hub style so I can use new water pumps.
  
  Turbo diesel airbox setup? Am I wishing for clouds of sugar here?
  
  Source for turbo gaskets, for between the exhaust manifold and the turbo, and the turbo and the downpipe? I'm guessing these are layered steel or copper, need them for the K24 trapezoid flange for the EM and the K03 on both sides.
• #1 by Vincent Waldon on 12 Aug, 2008 22:05
• I can give you one of the things you're after for free.... won't even charge you shipping and handling.  That's how generous we Canadians are, eh ??!!
  
  What I'm really saying is that, strange as it seems, there is no gasket between the exhaust flange and the turbo.  Some people have 'em made from copper sheeting, or use hi-temp gasket goo, but VW doesn't use 'em.  Probably something about "no material known to man can survive"??
  
  Good idea to lap both surfaces, but other than that they just bolt together.
• #2 by Turbinepowered on 13 Aug, 2008 04:24
• Quote from: "Vincent Waldon"

  I can give you one of the things you're after for free.... won't even charge you shipping and handling.  That's how generous we Canadians are, eh ??!!
  
  What I'm really saying is that, strange as it seems, there is no gasket between the exhaust flange and the turbo.  Some people have 'em made from copper sheeting, or use hi-temp gasket goo, but VW doesn't use 'em.  Probably something about "no material known to man can survive"??
  
  Good idea to lap both surfaces, but other than that they just bolt together.

  
  
  Love for generous Canadians! If you were a woman I'd kiss you.
  
  So no gasket between manifold and turbo, is there still one on the downpipe side?
• #3 by spencebm on 13 Aug, 2008 05:09
• you can get both gaskets from prothe/emiata, i dont know what he calls himself or if those are two different people, i got both the gaskets and they work good.
• #4 by spencebm on 13 Aug, 2008 05:10
• i also might have an air box if i am allowed to sell it :wink:
• #5 by Turbinepowered on 13 Aug, 2008 16:20
• Quote from: "spencebm"

  i also might have an air box if i am allowed to sell it :wink:

  
  
  Someone's holding your leash?
• #6 by Dirtrag2 on 13 Aug, 2008 17:29
• I've got a Mk3 airbox out of my jetta for 20$ plus shipping
  PM me
• #7 by G60ING on 14 Aug, 2008 19:42
• I've got a TD turbo inlet hose $30 shipped
• #8 by burn_your_money on 14 Aug, 2008 19:56
• I have the timing cover, just pay shipping
• #9 by Turbinepowered on 15 Aug, 2008 12:39
• I've got a turbo inlet hose, in really good shape, but I'm going to a smaller turbo so it might not fit.
  
  And I might be getting everything (minus the airbox) from another Foxer in one lump package, so tight as money is these days for me (School year starting will cure this quickly) I'm looking to save on shipping, so bear with me for another day...
• #10 by foxracer1 on 15 Aug, 2008 13:14
• Quote from: "spencebm"

  i also might have an air box if i am allowed to sell it :wink:

  
  
  Ben i have it at my place. Have everything from the turbo inlet to the plastic piece that fits in the fender wall.
• #11 by Turbinepowered on 20 Aug, 2008 07:35
• Bumping this up. Got my crank and water pump pulleys taken care of, but I haven't heard back from anyone I've PM'd about an airbox setup.
  
  My hookup for the batch list of everything I needed is moving, the only parts he can lay his hands on immediately are the pulleys, so I'm taking those and moving on.
  
  Burn, man, just tell me where to send money and how much shipping a backing plate down here to 29670 will be, and it'll be on the way.
• #12 by burn_your_money on 20 Aug, 2008 10:04
• Send me an IM. I can try and get it this weekend but I might not be able to get it for a while. It's up north at my parents house
• #13 by Dirtrag2 on 20 Aug, 2008 15:23
• :oops: sorry forgot about you dude!
  PM sent for airbox setup
• #14 by Turbinepowered on 21 Aug, 2008 02:42
• Hmmmm, may make this my current comprehensive parts hunt thread.
  
  How much would it cost me to lure a set of serpentine pulleys and a serpentine AC compressor from one of you folks? I don't need any of the brackets, but the serpentine alternator, water pump and crankshaft pulleys would all be needed...