« previous next »
Pages: [1]

Author Topic: Removing and Installing Prechamber Inserts  (Read 2206 times)

July 28, 2008, 08:47:33 pm

bluemotion

  • User+
  • Offline
  • *
  • 22
Removing and Installing Prechamber Inserts
« on: July 28, 2008, 08:47:33 pm »
What is the best way to remove and install the prechamber inserts on the 1.6 diesel heads?
Logged
Reply #1July 28, 2008, 09:19:56 pm

zukgod1

  • Veteran
  • Offline
  • ***
  • 2817
Removing and Installing Prechamber Inserts
« Reply #1 on: July 28, 2008, 09:19:56 pm »
Hammer and a drift, put drift down through the injector hole and hit it. Line up and tap back in when done, peen around it and your done.
Logged
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy
Reply #2July 28, 2008, 09:50:37 pm

zukgod1

  • Veteran
  • Offline
  • ***
  • 2817
Removing and Installing Prechamber Inserts
« Reply #2 on: July 28, 2008, 09:50:37 pm »
Quote from: "libbybapa"
The best way is to leave them alone unless absolutely necessary.

Andrew


This is true, I was going to ask why you wanted to remove them.

The head can and should be machined with them in place.
Logged
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy
Pages: [1]
« previous next »