-
Wich Cam-plate for AAZ pump?
by
Duzty
on 23 Jul, 2008 11:40
-
I need to get a 11mm element in my AAZ pump, nut wich camplate do i need? From what pump?
-
#1
by
gigaz2
on 23 Jul, 2008 12:50
-
the original one
-
#2
by
jimfoo
on 23 Jul, 2008 13:34
-
A later cam plate, The earlier AAZ had a smaller plunger foot, so the cam plate won't work with an 11mm head without modification. I'm not sure when the switch was, but my '95 had the early one.
-
#3
by
gigaz2
on 23 Jul, 2008 14:07
-
oh yeah, forgot that small detail...
I sanded my plunger (no pun intended) so it could fit the smaller cam plate, easy to do, even without special tools.
-
#4
by
zukgod1
on 23 Jul, 2008 14:28
-
I sanded my plunger (no pun intended) so it could fit the smaller cam plate, easy to do, even without special tools.
I did this as well.
-
#5
by
Duzty
on 24 Jul, 2008 12:29
-
just sand the bottom og the element until it fits?
What about the spline? Does it fit the smal cam-plate?
-
#6
by
gigaz2
on 24 Jul, 2008 12:47
-
yes, its a really small difference like 0,3mm
-
#7
by
Duzty
on 24 Jul, 2008 13:00
-
Super... THX, i will try that out
-
#8
by
Duzty
on 24 Jul, 2008 13:51
-
I think there are to much gab between the spline and element?
-
#9
by
gigaz2
on 24 Jul, 2008 16:10
-
I thought it had the same gap as the 1.9 stock pin, so left it like that, just made 50km today, my injectors are leaking and the timing was set by ear... so it can't be that bad
-
#10
by
Tintin
on 25 Jul, 2008 09:18
-
The AAZ pump with the correct came plate is the model with the adjustable pump timing pulley.
If you have to move the entire pump to adjust the timing, It's the old model of came plate (samll foot)