Author Topic: Custom Intake Manifold (Read 3106 times)

mkosem · « **on:** May 18, 2005, 12:52:57 pm »

I've been considering having a customized intake manifold fabbed for my 01 TDI. I was thinking of either having an aluminum tube attached to the top of the runners on the stock TDI manifold as a plenum with the option of allowing air in on either side. Or alternatively, I was considering doing the same with an earlier IDI manifold that has slightly longer runners. I could probably have something like this done for under $100 excluding the cost of the manifold itself.

Sound like a viable plan? I would eliminate the EGR compeletely and have the upper IC pipe re-routed to the new inlet(or on the other side from an FMIC if I go that route.

--Matt

TDIMeister · « **Reply #1 on:** May 18, 2005, 03:20:59 pm »

Here's custom for you:

Edit: Dammit. I'll fix the link when I get home.
2nd Edit: Fixed.

jackbombay · « **Reply #2 on:** May 18, 2005, 07:28:22 pm »

Pic still not working, "The connection was refused when trying to contact dave-oh..."

TDIMeister · « **Reply #3 on:** May 18, 2005, 10:30:48 pm »

Sorry, my home PC where the picture is hosted gave me a scare and shut-off spontaneously and would not come back on until later in the night. :?:

Should work now. Nothing really new for those who have followed the mods on my car.

PYRO · « **Reply #4 on:** May 18, 2005, 10:31:18 pm »

Works fine for me.