Author Topic: WTB a turbocharger for a 1.6 TD (Read 4168 times)

duff · « **on:** July 16, 2008, 03:38:17 am »

i need a turbocharger that will fit a 1.6TD out of an 84 jetta.

burn_your_money · « **Reply #1 on:** July 16, 2008, 12:55:07 pm »

ready to go or rebuildable condition?

duff · « **Reply #2 on:** July 16, 2008, 04:35:11 pm »

preferably ready to go but im in a bit of a time crunch and a will take one that needs to be rebuilt

zukgod1 · « **Reply #3 on:** July 16, 2008, 05:11:13 pm »

Quote from: "duff"

preferably ready to go but im in a bit of a time crunch and a will take one that needs to be rebuilt

Where do you live duff?
If you needed one rebuilt, buy a good one from burn send to me and I'll rebuild it for ya.. You pay for the kit and kick me $50 for my time. You end up with a turbo with new bearings and seals ready to bolt on and go.

duff · « **Reply #4 on:** July 16, 2008, 06:52:55 pm »

i live in Texas.
that sounds good but how long do you think it will take bercause i need this on my engine by the end of the month.

burn_your_money · « **Reply #5 on:** July 16, 2008, 08:11:30 pm »

From Canada takes 2 weeks to the states most of the time unless you pay more money for shipping (like a lot more)

I will sell a rebuildable K24 if you need

zukgod1 · « **Reply #6 on:** July 16, 2008, 08:19:25 pm »

you could order the kit and have it and the turbo shipped to me in Utah, I would only need a day to do the rebuild depending on when it arrived and could ship to you within 2 days I'll bet.

duff · « **Reply #7 on:** July 16, 2008, 09:30:16 pm »

how much will a rebuildable k24 cost me?

Turbinepowered · « **Reply #8 on:** July 16, 2008, 09:36:56 pm »

Quote from: "duff"

how much will a rebuildable k24 cost me?

I have a rebuildable (I think?) K24. It sat outside, I drained a little water and oil back out if it when I pulled it, but it turns nicely. I wouldn't just bolt it on the car and go, because of the whole "had water in it" thing.

That and it had a leaking oil seal when I bought the car.

I don't wanna steal a sale from Burn 'cause he's an awesome dude, but I'll probably be buying a rebuildable turbo from him at some point when I turbo the Syncro so it'll prolly be a wash.

zukgod1 · « **Reply #9 on:** July 17, 2008, 12:19:43 am »

Just for reference duff I just bought a kit from http://www.gpopshop.com/rebuildkits.html and it was $124. shipped second day to me as well.

Turbinepowered · « **Reply #10 on:** July 17, 2008, 12:22:57 am »

Quote from: "zukgod1"

Just for reference duff I just bought a kit from http://www.gpopshop.com/rebuildkits.html and it was $124. shipped second day to me as well.

x2. Good folks to work with.

burn_your_money · « **Reply #11 on:** July 17, 2008, 12:49:44 pm »

Quote from: "Turbinepowered"

I don't wanna steal a sale from Burn 'cause he's an awesome dude,

Thanks. Steal away though, I won't be offended.

I can include a rebuild kit with the turbo to save on shipping. I'll need to get the price for the kit from Giles though

saurkraut · « **Reply #12 on:** July 17, 2008, 01:03:44 pm »

Hey Burn

Has Giles found the 360° thrust bearing?

How much do you want for your 'rebuildable' K24, with no kit.

zukgod1 · « **Reply #13 on:** July 17, 2008, 01:18:07 pm »

Quote from: "burn_your_money"

I can include a rebuild kit with the turbo to save on shipping. I'll need to get the price for the kit from Giles though

That would be the way to go for sure, especially if you can get the 360 thrust bearing.

Turbinepowered · « **Reply #14 on:** July 18, 2008, 06:58:41 pm »

Quote from: "burn_your_money"

Quote from: "Turbinepowered"

I don't wanna steal a sale from Burn 'cause he's an awesome dude,

Thanks. Steal away though, I won't be offended.

I can include a rebuild kit with the turbo to save on shipping. I'll need to get the price for the kit from Giles though

This I cannot do, however. My (purchased) rebuild kits are for K03s.