Author Topic: Help me pick a good turbo once and for all. (Read 26864 times)

zukgod1 · « **Reply #30 on:** July 07, 2008, 11:54:17 am »

Well I have been searching for hours and have found nothing!

I can find ones like this one. http://cgi.ebay.com/ebaymotors/T3-T4-Turbo-Turbocharger-w-wastegate-Boost-Controller_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262QQcategoryZ33742QQihZ002QQitemZ120271301922

And ones close but it looks like that's to big for what I need.

I found a VW manifold with the T3 mount so I can mount it without having to build an adapter (which it what I'll prob end up doing anyway to save money).

zukgod1 · « **Reply #31 on:** July 07, 2008, 11:55:03 am »

Quote from: "jackbombay"

Kerma has them.

Ya, I'm not spending $1200+ on this deal...

zukgod1 · « **Reply #32 on:** July 07, 2008, 12:06:54 pm »

I was willing to try that T3 that Pete has listed on his site but there still not available

jtanguay · « **Reply #33 on:** July 07, 2008, 12:09:48 pm »

i think tintin was selling his vnt-20 for about $600??? having a brand new one sure is nice, but quite pricey!!!

jtanguay · « **Reply #34 on:** July 07, 2008, 12:13:21 pm »

http://cgi.ebay.de/Turbolader-Turbo-Mercedes-CDI-Garrett-GT20-200CDI-TOP_W0QQitemZ220252146722QQihZ012QQcategoryZ61308QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

that would be a decent turbo... basically a vnt-20 but with a regular wastegate.

zuk the one you posted from ebay is only good for a gasser. the a/r is off by too much.

http://cgi.ebay.de/gebr-Turbolader-Audi-A4-und-A6-TDI_W0QQitemZ170233889502QQihZ007QQcategoryZ61915QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

looks like a PD150 turbo right there.

zukgod1 · « **Reply #35 on:** July 07, 2008, 12:14:58 pm »

Quote from: "jtanguay"

i think tintin was selling his vnt-20 for about $600??? having a brand new one sure is nice, but quite pricey!!!

Ya for sure.

I think I'm going to have to stick with a t3/t4 deal and make an adapter.
May just weld the flange on the OE manifold so it will bolt right on.
I would like to get a new manifold as well so it just bolts on and may still do that, just with all the other adaption crap I have to deal with as well, New DP and intake set up as well and the inter-cooler piping..

zukgod1 · « **Reply #36 on:** July 07, 2008, 12:16:18 pm »

This one doesnt look to bad but no compressor map to compair to

http://cgi.ebay.com/ebaymotors/T3-45-TRIM-TURBO-CHARGER-stage3-oil-line-dp-flange_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262QQcategoryZ33742QQihZ025QQitemZ380042262114

I would have to build a external waste gate as well.

zukgod1 · « **Reply #37 on:** July 07, 2008, 12:19:42 pm »

Quote from: "jtanguay"

zuk the one you posted from ebay is only good for a gasser. the a/r is off by too much.

That's what I thought, what about the last one I posted?

jtanguay · « **Reply #38 on:** July 07, 2008, 01:52:18 pm »

Quote from: "zukgod1"

Quote from: "jtanguay"

zuk the one you posted from ebay is only good for a gasser. the a/r is off by too much.

That's what I thought, what about the last one I posted?

COMPRESSOR .42 AR COMPRESSOR
TURBINE .48 AR TURBINE

hmmm thats not bad. it will be more like the mercedes turbo from what andy2 has said. it will be a bit laggier than the T3's that came with our engines, but should stand up to quite a bit of abuse.

if it wasn't for shipping those european turbo's would be awesome!!!

jimfoo · « **Reply #39 on:** July 07, 2008, 02:42:22 pm »

Never dealt with them, but, http://www.spooledmotorsports.com/turbochargerscat.php?category=Used

zukgod1 · « **Reply #40 on:** July 07, 2008, 02:55:20 pm »

Quote from: "jimfoo"

Never dealt with them, but, http://www.spooledmotorsports.com/turbochargerscat.php?category=Used

Hmmmmmm!!..

zukgod1 · « **Reply #41 on:** July 07, 2008, 03:14:32 pm »

So this is what it looked like after a 530 miles drive with no turbo.

After a quick wash job.

subsonic · « **Reply #42 on:** July 07, 2008, 04:36:18 pm »

PM sent.
275 plus shipping

Jim

jtanguay · « **Reply #43 on:** July 07, 2008, 05:04:30 pm »

was it smoking bad? maybe that was just the residual oil burning off...

burnt_servo · « **Reply #44 on:** July 07, 2008, 06:24:41 pm »

quickly went through this thread ...... and i could find no one who has sugested compund turbo's .......

compound turbo's would give very fast spool up , but huge amounts of air on the top end , while also giving reliability of a single turbo at stock presure levels ( assuming it's enginered properly )

to prevent the k24 from self destructing at 25 -35 psi , add a bigger turbo that feed into it , taking alot of stress off it , and putting it back with in it's operating limits .

the question is , what would make a good big turbo to pair up with the k24 ?
would something like a k26 be large enough ?