Help!! Where can I find a good pulley??? - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• Help!! Where can I find a good pulley??? by mtnbob on 29 May, 2008 23:59
• Any suggestions on where to find a tensioner pulley for an 86 1.6 N/A? It is for the v-belt that runs from the A/C to the Alternator. I can't find it in the book or online. Part #?? Mine is starting to whine, is there a way to replace just the bearing??
• #1 by Quantum TD on 30 May, 2008 09:22
• Here you go:
  
  http://www.vxb.com/page/bearings/PROD/6202-2RS?gclid=COD9g4OBro0CFQZnZQodfCYF1g
  
  I bought about a dozen of these just for that pulley. The pulley is available from the dealer (or it was about a year ago) for about $75.
  
  The part number is on the side of the pulley. Check 1stvwparts.com if you want to go crazy and buy the whole pulley.
• #2 by rallydiesel on 30 May, 2008 11:13
• Quote from: "Quantum TD"

  Here you go:
  
  http://www.vxb.com/page/bearings/PROD/6202-2RS?gclid=COD9g4OBro0CFQZnZQodfCYF1g
  
  I bought about a dozen of these just for that pulley. The pulley is available from the dealer (or it was about a year ago) for about $75.
  
  The part number is on the side of the pulley. Check 1stvwparts.com if you want to go crazy and buy the whole pulley.

  
  
  Nice find.
• #3 by mtnbob on 30 May, 2008 12:10
• Ty for your help!!!!!
  I just bought 2 on ebay for $4.29 shipped!
  I found them locally too, but minimum $10 order and $6.50 each :shock:
  Are they hard to punch out?
  Robert
• #4 by Quantum TD on 30 May, 2008 17:31
• Nope. Just use a socket the size of the outside of the bearing, and your bench vise. It should pop right out. Then use the same trick to install it.