2 1.6l blocks both have good bores and one both are low mileage. neither one has more then 100k on it. I paid $350 for the one with the blue paper towles on, it was recently honed and done with new bearings/seals everywhere.
$200 for the "fresh" one and $150 for the other one.
http://www.flickr.com/photos/theloneprojects/2524997869/FN trans 50-60k on it $200
http://www.flickr.com/photos/theloneprojects/2524997861/I have various pumps in various stages of condition
at least 1x TD pump that sprung a leak from ULSD and 1x NA pump same deal
Then I have 1x unknown TD pump and 1x unknown NA pump
$100 a pump?
Have a head with no cam and no cracks $100
Have a head that has the one injector area cracked, can be repaired by a good welder $150 this head is fresh with less then a 1k on it (TD)
Block from that head also fresh new parts everywhere $300 (TD)
It's all wrapped up and sealed well so I didn't get a picture but can if serious interest.
Injectors lines, I have several sets, TD and NA