Author Topic: FS VNT15 TDI manifold/turbo (Read 4933 times)

foxracer1 · « **on:** May 07, 2008, 04:08:10 pm »

I have ported the ports and exhaust of the turbine just slightly to remove castings flaws. I cut and rotated the EGR port to allow use of a wastegate and to clear a gasser intake manifold. This will no longer work a tdi with EGR, also the center section is different. I have two actuators i have cut them open to flip the spring but have not reassembled them yet. The factory one was junk and burnt up. The center section and turbine shaft are from jimfoo's vnt17. They are brand new with no hrs. The center section is watercooled so the ports are different than a factory TDI. The mani/turbo is from an 2001 TDI Jetta auto. The vanes work great and i cleaned all the carbon off of them. If you have anymore questions just ask. Looking to get $250 or make me an offer. I'm just looking to get what i have paid for it. Not counting labor.

foxracer1 · « **Reply #1 on:** May 11, 2008, 08:17:44 pm »

conor · « **Reply #2 on:** May 12, 2008, 06:12:56 am »

Interested...do you think you could send me or post some pics. Also, any idea what shipping would be to zip 01027?

Cheers,
Conor

foxracer1 · « **Reply #3 on:** May 14, 2008, 07:07:25 pm »

My computers down now so i'll have some pics up as fast as possible.

foxracer1 · « **Reply #4 on:** May 24, 2008, 10:41:48 pm »

foxracer1 · « **Reply #5 on:** May 30, 2008, 07:17:54 pm »

foxracer1 · « **Reply #6 on:** June 17, 2008, 04:24:53 am »

:arrow: bump

DonGTI · « **Reply #7 on:** June 17, 2008, 07:14:18 am »

interested ... PM sent

jimfoo · « **Reply #8 on:** June 17, 2008, 07:23:56 am »

Haha, I PM'd him first. :lol:

DonGTI · « **Reply #9 on:** June 17, 2008, 09:14:01 am »

DonGTI · « **Reply #10 on:** June 17, 2008, 09:16:29 am »

... if you change your mind i'm still interested

blkboostedtruck · « **Reply #11 on:** June 17, 2008, 02:01:30 pm »

you still lookin for a quad round head light grill for a MK2 foxracer?
Duane