Author Topic: WTB: 1.6TD head (non-hydr.) (Read 4449 times)

fastvicar · « **on:** May 02, 2008, 04:18:22 am »

Just blew mine up last night. I'm in a bind.

fastvicar · « **Reply #1 on:** May 08, 2008, 06:57:27 am »

Found one on the Vortex.

fastvicar · « **Reply #2 on:** June 04, 2008, 08:15:40 am »

Update: Found one on the Vortex, paid for it the first week of May, and it still hasn't shown up. So I guess I'm still looking for a head. And deaneid from TN, I might add.

Quantum TD · « **Reply #3 on:** June 04, 2008, 09:18:29 am »

Quote from: "fastvicar"

Update: Found one on the Vortex, paid for it the first week of May, and it still hasn't shown up. So I guess I'm still looking for a head. And deaneid from TN, I might add.

Hmm. I noticed that he never responds on his threads. I IMed him about 3 weeks ago on the TD motors he has. He reponded immediately. But I do notice alot of interest in his thread, but no repsonses. He might be on vaca.

As for the head, I'd say just find a good, late mechanical head (ones with the suffix 'F' are good), and just put the sodium-filled valves in it. NA or Turbo are exactly the same in every respect except the valves (as far as I know/am concerned). I really think the claims that the heads are different is a load of crap.

fastvicar · « **Reply #4 on:** June 04, 2008, 10:33:21 am »

Nope, not on vacation, just "busy."

I thought the pre-cups/chambers were different & they had a lower CR. ??

Fisher · « **Reply #5 on:** June 04, 2008, 09:05:07 pm »

I was told by an Aluminum Cylinder Head shop in Portland that any E or F casting is ok for a Turbo Diesel.

I have three, two are E castings and one is an F casting.

I'd just go with any good Mechanical Head, use Turbo diesel Exhaust Valves and run it.

fastvicar · « **Reply #6 on:** June 06, 2008, 12:03:42 pm »

Okay, so does anyone have a 1.6L solid head for sale? 11mm haedbolt would be best, actually.

fastvicar · « **Reply #7 on:** June 12, 2008, 05:15:40 am »

I received a tracking # for my Vortex head, so I hope my search is over. :roll: