Author Topic: WTB crank vent tube (Read 3907 times)

flash319 · « **on:** April 10, 2008, 04:05:07 pm »

I broke the crank vent tube that runs up to the valve cover from the block. It is on a 1.9 but I think a 1.6 would be the same.

Quantum TD · « **Reply #1 on:** April 10, 2008, 07:31:39 pm »

1.6 didn't come with a crank breather tube: at least not the ones I've seen. You've got a 1.9. Everyone I've ever seen used has been cracked. Good luck.

flash319 · « **Reply #2 on:** April 11, 2008, 10:37:19 am »

Called dealer and they have one for $50. I thought it would be more. I think I will just get a new one.

Thanks

stewardc · « **Reply #3 on:** April 12, 2008, 08:06:06 am »

I made a steel plate and welded a fitting to it, then I ran a plastic line the rest of the way. Be creative. Mine will end in the can below so that I get no oil in the turbo.

myke_w · « **Reply #4 on:** April 13, 2008, 11:08:27 am »

it's part # 028103491J, dealer list is about 53 bucks

came on all aaz and ahu

jimfoo · « **Reply #5 on:** April 13, 2008, 11:41:44 am »

Quote from: "stewardc"

I made a steel plate and welded a fitting to it, then I ran a plastic line the rest of the way. Be creative. Mine will end in the can below so that I get no oil in the turbo.

You should have a dielectric union on that water heater. Nice catch can though.

stewardc · « **Reply #6 on:** April 13, 2008, 01:06:57 pm »

Quote from: jimfoo

You should have a dielectric union on that water heater.
Quote

Agreed....dumb plumber !