Author Topic: WTB: IDI TD IP Vacuum and return bits for LDA. (Read 3483 times)

Ziptar · « **on:** April 08, 2008, 06:21:12 am »

Might Need TD IP Fittings and return line.

I sent a core to Giles to have it re-done but it is setup as an ATM not an LDA. My Eco has neither.

Looking to see if anyone has the fittings for the LDA for the intake vacuum line, return line banjo bolt, and air vent.

Waiting to see if Giles has extras for it but, just in case.

I need a TD return line either way so if you have one, PM Me.

Thanks,

burn_your_money · « **Reply #1 on:** April 08, 2008, 11:57:49 am »

I have a TD pump core. It's mostly complete. Missing a few banjo bolts though

blkboostedtruck · « **Reply #2 on:** April 08, 2008, 04:17:19 pm »

Tyler, if you got 1.6 boost pin i can use that for that 1.9 if your parting a pump for Ziptar let me know?
Duane

Ziptar · « **Reply #3 on:** April 08, 2008, 07:17:37 pm »

Tyler,
Tahnks, if worse comes to worse. It really cheap though right? :wink: