Author Topic: Leaking fuel screw... (Read 4619 times)

Powered by Spearco · « **on:** April 06, 2008, 09:04:08 am »

I've got a small amount of diesel dripping from the fuel screw. To fix it I need to remove it, but I know that this screw is very sensitive to any movement. Do I just count how many turns it takes to pull it out or is there an other way to replace the seal? Any help would be greatful.
Thanks, Josh

blkboostedtruck · « **Reply #1 on:** April 06, 2008, 09:20:43 am »

if the collar is still on thats easy! just back out the whole thing 13mm nut and all! change the "O" ring and put it back in ! easy !!!!
Duane

Powered by Spearco · « **Reply #2 on:** April 06, 2008, 09:29:42 am »

I've all ready pulled off the collar.

Powered by Spearco · « **Reply #3 on:** April 06, 2008, 09:37:36 am »

Hey, great idea! Why did'nt I think of that. I guess I'm always tring to make it to technical. Thanks, Josh

Powered by Spearco · « **Reply #4 on:** April 06, 2008, 05:05:50 pm »

Got it!

Fixed in less than ten minutes. No more leaks at this time.
Thanks for the help, Josh

Baselyne · « **Reply #5 on:** April 13, 2008, 11:21:38 am »

you lucky guy, some of us are pouring faster out the injection pump than they can get it in with the fuel station nozzel...

Author Topic: Leaking fuel screw... (Read 4619 times)

Baselyne