Miss during cold starting

[dieseldunebuggy]

Sorry I haven't been on for a while. I've been busy and my internet went down. I've checked and readjusted the valves. A couple of the intake valves had too much clearance. That may of helped a little, but it hasn't been as cold since I've checked them. When I started it when it was 70F outside it didn't have a miss at all. When it does miss it has some black smoke. Hopefully sometime I'll have enough time to take the injectors out, have them checked, and check the compression.

[fastvicar]

Mine reacts the same way.  My cam is shot & I'll be replacing it in a couple days.  I'll try to let you know my findings.  I also have new nozzles staged for later on in the week.

[fastvicar]

Okay, "new" cam is in & I can report easier starting and better idle.  Boost builds quicker and my exhaust now sounds like a Cummins at idle (this is a very good thing).  However, something's still not right with fueling so new nozzles are going in soon.