Author Topic: 1.9 block with 1.6 head??? (Read 4320 times)

Torchd · « **on:** March 04, 2008, 07:29:27 am »

Can i use a 1.9TD block with a head, turbo and IP from a 1.6TD??

Will everything fit bolt on, without any alteration and what kinda results should i be looking for??

Has any one done this setup??

Help pleasee!??

Torchd · « **Reply #1 on:** March 05, 2008, 02:37:22 am »

So... it cant be done???

what happens if the compression ratio will be too high?? how can i lower it?

saurkraut · « **Reply #2 on:** March 05, 2008, 09:34:01 am »

Quote from: "Torchd"

So... it cant be done???

what happens if the compression ratio will be too high?? how can i lower it?

Put a 1.9 head on it.

jimfoo · « **Reply #3 on:** March 05, 2008, 09:46:34 am »

You could also grind the pistons down, though you'd have to figure just how much to grind. But why would you want to put on a head that doesn't flow as well?

RabbitJockey · « **Reply #4 on:** March 05, 2008, 09:18:12 pm »

it won't be too high theres alot of 1.9s with 1.6 heads on them running around. hill folk has a mk2 with a 1.9 block and 1.6 head, its na tho.

Torchd · « **Reply #5 on:** March 06, 2008, 12:25:33 am »

Hmm seen!! i wud love to put a 1.9 head on a 1.9 block but the thing is i dont have the 1.9 head...

hmmm..... im looking to run 1.6 MF turbo with 1.6 head and 1.9 block and will run abot 25 psi boost... so i guess thats not possible like u guys have always said..

So if i get the 1.9 head and 1.9 block... will the 1.6 MF turbo fit bolt onto 1.9 head? and will the IP from the 1.6TD fit as well??

Please reply soon.. i need to make the decision fast as im runnin late to order the parts..

cheers!

Torchd · « **Reply #6 on:** March 06, 2008, 05:24:44 am »

assuming the IP fits..... what injectors will i be using?? 1.9TD injectors? or 1.6TD injectors?? with 1.6td pump...??

Torchd · « **Reply #7 on:** March 07, 2008, 07:07:42 am »

Guysssss???

Can some one pleaseeee reply???

Vincee?

Andrew?

jimfoo · « **Reply #8 on:** March 07, 2008, 08:54:34 am »

If it's a 1.9, why would you want to use 1.6 injectors? However it will run with either.

Torchd · « **Reply #9 on:** March 08, 2008, 02:00:41 am »

Cuz... the IP is from a 1.6TD... but the head and block are of a 1.9.... so im confused!

jimfoo · « **Reply #10 on:** March 08, 2008, 08:51:59 am »

Use the 1.9 injectors.

oldskool rich · « **Reply #11 on:** March 08, 2008, 06:53:33 pm »

well in my eyes the 1.6 injectors hav slacker springs so you can deliver more fuel, thats what i run although if sumone can tell me im wrong please do.

audi80s 225bhp aaz is running a 1.6 head, 1.9 block, 1.6 injectors

my mate thinks that the 1.6 head increases the gas speed and higher compression is a good thing too, aaz gasket should hold

tbh your probly best speaking to some one thats done it already

Mexe · « **Reply #12 on:** March 08, 2008, 07:08:11 pm »

My friend is running a 1.9 block with a 1.6 head and 1.6 GTD injectors. He has had no problems with it and is running at least 22 psi if not more by now. The thing goes and as his dad says runs circles around their chipped Mk4 TDI Jetta.

Torchd · « **Reply #13 on:** March 10, 2008, 02:43:45 am »

Quote from: "Mexe"

My friend is running a 1.9 block with a 1.6 head and 1.6 GTD injectors. He has had no problems with it and is running at least 22 psi if not more by now. The thing goes and as his dad says runs circles around their chipped Mk4 TDI Jetta.

Which IP is he using?

Torchd · « **Reply #14 on:** March 10, 2008, 02:45:11 am »

Quote from: "oldskool rich"

well in my eyes the 1.6 injectors hav slacker springs so you can deliver more fuel, thats what i run although if sumone can tell me im wrong please do.

audi80s 225bhp aaz is running a 1.6 head, 1.9 block, 1.6 injectors

my mate thinks that the 1.6 head increases the gas speed and higher compression is a good thing too, aaz gasket should hold

tbh your probly best speaking to some one thats done it already

Which IP is he using?

and The audi 80 u are talking about... hasn't that guy already done it??