Author Topic: 1.6 Turbo pistons in NA motor, will it work? (Read 2660 times)

overdrivegear · « **on:** March 04, 2008, 07:23:13 am »

Will 1.6 turbo pistons work in a NA engine? The only difference I know of is that the turbo pistons have notches for oil cooling but as far as wrist pin height, crown, compression ratio, etc. I think they are the same as the regular 1.6 NA pistons.

subsonic · « **Reply #1 on:** March 04, 2008, 08:01:44 am »

They should as far as I know. If you are planning on adding a turbo it could not hurt. They are suppossed to have a hard anodized surface.

myke_w · « **Reply #2 on:** March 04, 2008, 09:15:07 am »

it's a direct fit.

Torchd · « **Reply #3 on:** March 05, 2008, 09:29:40 pm »

Will 1.9TD pistons fit into a 1.6NA?

MJF · « **Reply #4 on:** March 06, 2008, 01:54:30 am »

No, 1,9 have 3mm larger bore.

Torchd · « **Reply #5 on:** March 06, 2008, 02:22:50 am »

hmm... if we increase the bore and everything... is the wrist pin and stroke same?? what will i have to do to fit it?

thanks!

subsonic · « **Reply #6 on:** March 06, 2008, 06:57:25 pm »

1.7 KY