E-bay: 12mm plunger/head mech. turbo pumps

[renny10n]

Just wanted to give you guys the heads up on some turbo mech pumps on e-bay.   These are rebuilt 12mm pumps used on the cummins 4BT(4cyl.) & I have read that they would be suitable for TDI mechanical application.  They are all right rotation(same as vw) w/ the 20mm drive shaft & have the big 12mm plunger/head to properly operate the TDI injectors.  From what I understand, would just have to mod the gov. for more rpms, since the 4BT. operates in a lower rpm range.

 BTW, if you don't already know, the 6th digit of the Bosch pump # indicates the plunger size(9 for 9mm, 0-10mm, 1-11mm, 2 for12mm) & the 7th digit the application(4 for 4cyl., 6 for 6cyl., etc.)
i.e. #0-460-424-XXX VE

 Anyways, contacted this vendor(saulg) & he said he has "lots" of these pumps.  Here is the links to just afew of these pumps he's auctioning off on e-bay:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7958441571&ssPageName=STRK:MEWA:IT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7958441622&ssPageName=STRK:MEWA:IT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7958441647&ssPageName=STRK:MEWA:IT

 

[Mikeyworks]

Thanks for the heads up...

[renny10n]

Thanks for the heads up...

Hey Mikeyworks,


BTW,  did you find a mechanical pump for your TDI project?

[Mikeyworks]

found one...but decided to keep the car as a whole.

I think I am going to sell off the car for a tidy profit and then buy a wrecked TDI or the like for the whole setup as an electronic TDI.

I think an electronic TDI with the new DSG tranny found only in the NB's would be a very nice combo in the Caddy!!!!

Mikey

[jlast]

"I have read that they would be suitable for TDI mechanical application."

CAN you please inform me on this?


BTW,   i have tried several times to deal with that seller,   IMO   he is quite shady and i personally  would not deal with him.