Author Topic: T3 downpipe flange? (Read 3319 times)

TedV · « **on:** January 24, 2008, 08:31:16 pm »

Is there a common known downpipe flange readily available for the 1.6TD T3? All the “Import Tuner” turbo shops cant seem to tell you the dimensions on any flange or pipe. Are you supposed to just order parts you have no use for until you get something that works?? Gggrrr..

I tried messaging Dave at PP, but no response, not seen him on lately either and I need something immediately. I don’t really feel like making one with a hole saw and small band saw.

burn_your_money · « **Reply #1 on:** January 24, 2008, 11:23:19 pm »

Call Dave, he prefers the phone

TedV · « **Reply #2 on:** January 25, 2008, 10:44:59 am »

call made and they gave me some info. Nice folks

flapjack · « **Reply #3 on:** January 25, 2008, 11:29:39 am »

here is a picture

http://www.t3flange.com/t03_output.gif

they've got the cad drawing up too, but its for the new autocad

http://www.t3flange.com/cad/t3_output.DWG

MJF · « **Reply #4 on:** January 25, 2008, 11:56:04 am »

Nope, it´s not that. 1,6 Garret has 4-bolt flange.

TedV · « **Reply #5 on:** January 26, 2008, 07:02:06 am »

Quote from: "MJF"

Nope, it´s not that. 1,6 Garret has 4-bolt flange.

yup, 4 bolt pattern is about 2.5" square with about a 2.25" opening from the turbo

935racer · « **Reply #6 on:** January 27, 2008, 11:19:22 am »

Here is the flange pn you need if you order from ATPturbo.com

ATP-FLS-032

TedV · « **Reply #7 on:** January 29, 2008, 09:25:37 am »

Quote from: "935racer"

Here is the flange pn you need if you order from ATPturbo.com

ATP-FLS-032

thanks again. I have a list of parts on the way to me, some assembly required. :twisted:

hope I'm not rusty on my pipe welding skills :lol: