« previous next »
Pages: [1]

Author Topic: VNT operation?  (Read 1861 times)

January 05, 2008, 09:00:48 am

foxracer1

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 991
VNT operation?
« on: January 05, 2008, 09:00:48 am »
When looking at the turbine wich way do the vanes face when closed for full boost? Do they point at the turbine or lay flat? I'm confused about it and while designing my controller i'll need to know this. I could make it work both ways in my head i'm sure the right way will make more sense.
Logged
84 4dr Rabbit 1.6 N/A sold to friend
86 Jetta TD getting raced out AHU 02A
98 Jetta TDI Malone tune stg 3
91 S10 305 TPI T56
86 S10 2WD Prerunner project.


Now offering turbo rebuilds. HP or stock. Any turbo you have i can rebuild it for ya.
Reseal injection pumps PM for det
Reply #1January 05, 2008, 09:03:09 am

jimfoo

  • Veteran
  • Offline
  • ***
  • 2110
    • http://www.66rover.com
VNT operation?
« Reply #1 on: January 05, 2008, 09:03:09 am »
Laying more flat and closed increases the velocity and boost and restriction.
Glad to hear it's finally getting to the point of going on.
Logged
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily
Pages: [1]
« previous next »