Author Topic: WTB stuff to convert a TD to NA (yeah I said it) (Read 5636 times)

burn_your_money · « **on:** December 10, 2007, 08:32:30 pm »

I only need an oil pan now, thanks everyone

I'm looking for an intake manifold with air box, exhaust manifold and an oil pan. The oil filter flange may also be needed.

Must be located in Canada as I need these parts ASAP.

This is NA stuff, I know everyone (but me) has a stock pile of it. It's for a MK2 but that doesn't matter for the air box. I need the bolts for the air box if you have them.

Am I missing anything else?

I need a oil pump too :oops: 36mm with bolts please

burn_your_money · « **Reply #1 on:** December 10, 2007, 09:18:24 pm »

Nevermind, after some though I've realized a fatal flaw in my plan and won't be going through with it anymore. It'll be too expensive (or I'm too cheap)

Anyone have a complete NA block on the cheap?

I still need a NA pan though

duffer · « **Reply #2 on:** December 10, 2007, 10:01:45 pm »

Mechanical Block or Hydraulic?

KTZed · « **Reply #3 on:** December 10, 2007, 10:37:10 pm »

I have a complete NA mech lifter engine you can have in trade for that cluster your sending me

But im all the way on the west coast and shipping an engine sucks :evil:

burn_your_money · « **Reply #4 on:** December 11, 2007, 05:12:53 am »

Damn I was going to jump all over that offer.

I've made an offer on a 1.6NA golf that was in an accident so we will see where that goes.

The engine is hydro but I just need the pan to cover the crank while it awaits a rebuild. My brother stole my windage tray and the bottom end is currently wrapped in plastic

bevboyy · « **Reply #5 on:** December 11, 2007, 06:43:33 am »

Tyler, I have the exhaust manifold and downpipe for MK1 if you want.

burn_your_money · « **Reply #6 on:** December 11, 2007, 08:36:11 am »

I'm just looking for an oil pan right now, thanks though

patracy · « **Reply #7 on:** December 12, 2007, 04:19:31 pm »

Quote from: "burn_your_money"

I'm just looking for an oil pan right now, thanks though

I should have one. I'm replying to your PM.

hamradio · « **Reply #8 on:** December 13, 2007, 02:11:56 pm »

What's your plan? Just to get it going, or some cool na hp project?

hamradio · « **Reply #9 on:** December 13, 2007, 02:12:25 pm »

Also, I do have a na exhaust mani if needed.

burn_your_money · « **Reply #10 on:** December 17, 2007, 07:34:04 am »

I have a good block sitting in my shed with no accessories on it. I want a NA for the simplicity and cost (poor college student) but it looks like I'll just do the headgasket job on the TD instead

The pan is to protect my block since I sold the TD pan

Baselyne · « **Reply #11 on:** December 17, 2007, 05:10:41 pm »

burn, if you want to get at me with what your looking for....

I know I might have some of those N/A things your looking for! i could drop it off for ya when i roll up to get the springs

LMK

Author Topic: WTB stuff to convert a TD to NA (yeah I said it) (Read 5636 times)

Baselyne