Author Topic: 1.5 head studs? (Read 2943 times)

Turbinepowered · « **on:** November 13, 2007, 01:31:15 pm »

Looking at upgrading to studs when I put the turbo on the 1.5, but unlike the 12mm 1.6 engines there doesn't seem to be a commonly known and readily available kit for the 1.5's 11mm bolts.

So... I know the diameter, 11mm, but is the thread pitch the same?

Dsldub · « **Reply #1 on:** November 13, 2007, 04:14:20 pm »

edited for content

935racer · « **Reply #2 on:** November 13, 2007, 06:43:45 pm »

You can use 11mm gasser headstuds from arp.

saurkraut · « **Reply #3 on:** November 14, 2007, 05:43:41 am »

http://www.raceware-fasteners.com/index.htm

saurkraut · « **Reply #4 on:** November 14, 2007, 05:44:09 am »

nerts, double post :oops:

Author Topic: 1.5 head studs? (Read 2943 times)

935racer