Wanted: 1992 VW Golf trailer hitch - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• Wanted: 1992 VW Golf trailer hitch by srivett on 10 Mar, 2005 18:24
• I need one to move motorcycles.  Preferrably with a removable draw bar, 2" would be even better but unlikely.
  
  Anybody know if a Jetta hitch will fit?
  
  Steve
• #1 by Hammy on 10 Mar, 2005 20:37
• Steve;
   I was just pricing things out at my friend's parts place. He couldn't find anything for our year golf/jetta. It stopped at '87, and started at '95, go figure. I'm pretty sure golf would be the same as jetta, if one is available.
• #2 by srivett on 10 Mar, 2005 21:11
• Yep, nothing available from VW, Reese, HiddenHitch, or DrawTite.  I'll have to keep an eye on Ebay as well as visit the wrecker if nobody on here has anything.  
  
  Steve
• #3 by VWRacer on 10 Mar, 2005 21:29
• This one says it's from an '85, but isn't that the same as a '92?
  
  Ebay Auction
  
  Here's another hitch.
• #4 by srivett on 12 Mar, 2005 05:14
• Thanks for checking, I was actually asking about Golf/Jetta compatability because of those auctions.  My dealer said that the Jetta hitches have longer L brackets on the ends.  
  
  I'll probably end up getting a Jetta hitch from a wrecker and have my welder adapt it.  I'd also have him weld a 2" receiver to it so I can use my current selection of hitches.
  
  Steve
• #5 by Dr. Diesel on 12 Mar, 2005 11:50
• maybe canadian tire has old stock in one of their warehouses?
• #6 by srivett on 13 Mar, 2005 20:23
• Canadian Tire doesn't have a part number anymore so finding old stock would be difficult.
  
  If I undo the 4 bolts that are under the back of the car can I slide the entire bumper out fully assembled?  That would make it easier to measure things up.  I may just take the Class III hitch off the front of my van and have it hacked up.  
  
  Thanks, Steve