FS: 1.6TD engine and 4 195/60-14 tires mounted on rims.. - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: 1.6TD engine and 4 195/60-14 tires mounted on rims.. by bevboyy on 14 Feb, 2008 16:17
• Ok...
  
  I have sitting in my garage a rebuilt 1.6 TD mechanical lifter engine. Was rebuilt 2 years ago and has about 30,000 kms on the rebuild. Originally this was to be picked up by the buyer of my Quantum TD, but the buyer decided against it as it was too far to go for an engine and the one in the quantum is good.
  
  So... It's taking up room and it has to go..
  
  Engine is relatively complete. It will need a oil pan (as I used the oil pan on another motor) :twisted: , but I have a N/A Oil pan in very nice shape that I will include. No turbo or turbo exhaust manifolds (I may have one kicking around tho - no guarantees!), no intake manifold. Comes with an injection pump that is missing the LDA top (again, I used it for another project..) :twisted: Also the vacuum pump I pilfered...
  
  What you get is a good head and block, waterpump, alternator, injectors. Engine turns freely and has decent compression.  I have a N/a exhaust manifold and header pipe that I will throw in as I really don't need the stuff any more. :wink:
  
  Give me $350 for the whole assembly.
  
  I also have a set of 4 Bridgestone (I think..) all seasons mounted on Jetta Alloys. Balanced. Tires have clearly over 85-90% tread. Alloys have some curbage, but with a coat of paint they should be good to go. Get ready for spring - $120 for the set.
  
  Pics will come tomorrow!
  
  The engine and wheels are located in Brampton. Ontario
  
  PM me or gimme a shout at 416-451-7603
  
  J.C.:-)
• #1 by smoken u on 14 Feb, 2008 18:52
• Hey,I'm looking for another motor, could you send me some pics, at
  [email protected]
  
  Would you be willing to negotiate?
• #2 by Baselyne on 15 Feb, 2008 14:15
• id also like pics of that motor please..  [email protected]
• #3 by madmedix on 16 Feb, 2008 05:56
• Pictures of the wheels combo pls.
• #4 by bevboyy on 18 Feb, 2008 14:20
• Ok, here are the pics - better late than never!
  
  First: The engine:
  
  
  
  Main seal was replaced and is in excellent shape
  
  
  
  Peek at the bottom end. In great shape - cylinder walls are fresh.
  
  
  
  
  Top end, cam lobes in very good shape, no stuck lifters. All real nice..
  
  
  
  Front shot - LDA top off pump. I have the govenor assembly safely put away. I did find a n/a top if you want to run the pump. The pump itself is not leaking..
  
  
  
  
  Still comes with Mk1 mount. Timing Belt is in good shape. Non a/c pulley and bracket.
  
  
  
  Love that 1.6D casting!
  
  
  
  With a spare valve cover and N/A oil pan in very good clean shape.
  
  [/b]
• #5 by bevboyy on 18 Feb, 2008 14:30
• OK, here are pics of the rims and the tires. Tires are 195/60/14 3 of them are 90+% tread 1 is 85% tread.
  
  
  This is the one with the worse curbage:
  
  
  
  The rest just need to be resanded and resprayed:
  
  
  
  
  
  
  
  
  The tread on each tire:
  
  
  
  
  
• #6 by smoken u on 18 Feb, 2008 14:40
• would you be willing to negotiate a price for the motor?
• #7 by bevboyy on 18 Feb, 2008 14:45
• PM me with your offer.
• #8 by bevboyy on 19 Feb, 2008 18:45
• Engine tenatively sold...
• #9 by bevboyy on 20 Feb, 2008 05:47
• Engine SOLD
  
  Wheels still available. $120 mounted and balanced.... - heck - used tire itself is worth $30, then $15 to mount and balance. Times that by 4...
• #10 by bevboyy on 26 Feb, 2008 14:01
• Bump - Found out that the tires are not a matched set, 3 are the same performance radial, one is a BF goodrich TA.  Due to that light, I'm reducing the price to $100.
• #11 by bevboyy on 01 Mar, 2008 10:18
• Wheels SOLD