FS: 1.9TD ported, 10mm pump, rebuld - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• FS: 1.9TD ported, 10mm pump, rebuld by X@V on 02 Oct, 2007 18:04
• I'm selling my project's engine
  
  It's a fully rebuild 1.9TD
  
  The head was changed (brand new) 80000km ago
  The crank was also changed (new) 80000km ago
  
  The rings are new, headgasket (stacked with a MK3 TDI headgasket), the seals were changed, the block was painted. It's like new!
  
  The pump is build by Named Tintin, it's a special 10mm (acts like an other 11mm).
  
  The turbocharger is actually a T3 from a 1.6TD (leaks oil a little bit, maybe I will prefer to give a K24 with the engine)
  
  I ported the head (intake/exhaust port match)
  
  The injectors are rebuild/calibrated by Smog (1.6GTD nozzles) and I give my Merdedes nozzles with the engine.
  
  Generator, engine wiring hardness and cluster are included (MK3 cluster adapted on my MK2 wiring hardness)
  
  I want 1400$ CDN for this engine.
  
  
  
  
  
  
• #1 by zukgod1 on 11 Oct, 2007 11:09
• CRAP!!!!!!!!!
  
  You just have to be up there dont ya?!
  
  I think I've spent prob $12-1300.00 on my 1.6 rebuild so far.
  What part of Canada are you in?
  
  
  dan
• #2 by jtanguay on 11 Oct, 2007 11:36
• so the engine is basically 'broken in'
• #3 by X@V on 11 Oct, 2007 14:16
• The break-in period is basically done (it has about 3000km) @ 12PSI.
  
  zukgod1: I'm from Matane, Qc.
• #4 by Patrick on 11 Oct, 2007 17:12
• Just guessing, but the closest state to him is probably Maine.
• #5 by tSoG-84bit on 16 Oct, 2007 21:48
• Forgive my ignorance please, but is this an AAZ engine, how much of the wiring harness is just warning lights, and gauges, compared to how much is actually keeping the engine running?
  I'm Interested to put this in my mk1 rabbit, that's why I ask.
  
  thanks
  tSoG
• #6 by lacolocho on 19 Oct, 2007 14:36
• Would you be able to ship to the US? Could you give a shipping estimate to 97214?
• #7 by X@V on 29 Oct, 2007 21:32
• Of you're interested, use the private messages.
  
  Thanks!
• #8 by jtanguay on 30 Oct, 2007 00:14
• Quote from: "tSoG-84bit"

  Forgive my ignorance please, but is this an AAZ engine, how much of the wiring harness is just warning lights, and gauges, compared to how much is actually keeping the engine running?
  I'm Interested to put this in my mk1 rabbit, that's why I ask.
  
  thanks
  tSoG

  
  
  AAZ will run with one wire.  the fuel stop solenoid.  some aaz's have different sensors hooked up to the pump, but most can be de-activated/bypassed by giving them full 12v power supply all the time, etc.
• #9 by X@V on 30 Oct, 2007 10:39
• Yes it was answered by e-mail.
  
  My VNT17 is now on my TDI, I can't give it with the engine (K24 or T3, you can choice)
• #10 by X@V on 14 Jan, 2008 16:18
• Finally it's still for sale, I need money for my MK2 TDI project.
  
  1250$ FIRM
  
  With a K24 turbocharger.
  
  The headgasket is now a 3-notch metal.
• #11 by Han Solo on 20 Jan, 2008 00:28
• pm sent