WTB AAZ valve cover and injector lines - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• WTB AAZ valve cover and injector lines by subsonic on 07 Sep, 2007 20:15
• Looking for a AAZ valve cover and a set of 1.9TD injector lines.  Lines need to be in good shape please.
  
  Thanks, Jim
• #1 by houseofdiesel on 13 Sep, 2007 13:29
• What set of lines do you need? There are at least two different styles out there, I many sets and many valve covers $40 shipped for the lines $30 shipped for the v/c
  Greg
• #2 by subsonic on 15 Sep, 2007 19:22
• Well, for the lines, I am not sure.
  
  What I have is a 1.6 block and 1.6TD Giles pump.  Sitting on top is an AAZ head.  Not sure which style I need.  I guess I need 1.9TD lines.  Are these supposed to have a slightly larger interior diameter?  I need a AAZ valve cover as well.
• #3 by burn_your_money on 15 Sep, 2007 21:55
• What injectors are you using?
• #4 by subsonic on 16 Sep, 2007 06:55
• Rebuilt 1.9TD injectors.  They are a bit taller than the 1.6.
• #5 by houseofdiesel on 18 Sep, 2007 05:25
• This could be interesting...Let me look at the various lines I have and try to figure out which ones the least amount of height since your running 1.6 not 1.9 but taller injectors.
  Greg
• #6 by subsonic on 18 Sep, 2007 11:01
• From what I understand, the block height is the same between the 1.6 and the 1.9.  I believe the heads are the same deal as well.  I think the only difference is the injector height.  I have the taller of the two kinds of 1.9 injectors.  The only other difference I can think of is that I am using a 1.6TD pump instead of a 1.9TD pump.  I know 1.6 N/A lines will not clear the LDA on a 1.6TD pump.  I do not know if the LDA on a 1.9TD pump would be any higher.  I guess it would not matter even if it was, if I use 1.9TD (AAZ) lines I would think I would be all set.
  How do the lines look condition wise?
  
  Jim