« previous next »
Pages: [1]

Author Topic: Intercooling and fitment  (Read 2924 times)

August 26, 2007, 09:34:33 am

BellCityDubber

  • Veteran
  • Offline
  • ***
  • 251
Intercooling and fitment
« on: August 26, 2007, 09:34:33 am »
Okay.. so here's my present attempt at fitting an intercooler. (haven't routed piping yet)

Thoughts?

Logged
Reply #1August 26, 2007, 02:33:39 pm

nogama3

  • Junior
  • Offline
  • **
  • 162
Intercooling and fitment
« Reply #1 on: August 26, 2007, 02:33:39 pm »
looking good mate, how easy hard did you fitting it?
Logged
Reply #2August 26, 2007, 07:49:21 pm

BellCityDubber

  • Veteran
  • Offline
  • ***
  • 251
Intercooling and fitment
« Reply #2 on: August 26, 2007, 07:49:21 pm »
Quote from: "nogama3"
looking good mate, how easy hard did you fitting it?


It was actually quite easy.. I had a rather large intercooler and I traded it for this one... (it seems to be of similar dimensions to a SRT-4 intercooler).. maybe 2.5-3 inches deep, almost 15 inches long from tank to tank, and about 4-5 inches high...

I had to remove a plastic vent piece below the rad support, and then drilled 2 mounting holes in the rebar to suspend it from hangar tabs... and testfitted the bumper... but the bumper needs about 1/4" trimming around the lower vents as it runs into the intercooler...
Logged
Reply #3August 27, 2007, 04:57:06 am

nogama3

  • Junior
  • Offline
  • **
  • 162
Intercooling and fitment
« Reply #3 on: August 27, 2007, 04:57:06 am »
see, i want to do that but dont  have the time or the skills to do that.
looking at various intercoolers that will fit into my mk3 bumper.
found one on ebay that would have fitted easily but got outbid in the dying seconds...
Logged
Reply #4August 27, 2007, 10:16:30 am

numbnuts

  • Junior
  • Offline
  • **
  • 99
Intercooling and fitment
« Reply #4 on: August 27, 2007, 10:16:30 am »
Quote from: "nogama3"
see, i want to do that but dont  have the time or the skills to do that.
looking at various intercoolers that will fit into my mk3 bumper.
found one on ebay that would have fitted easily but got outbid in the dying seconds...


Hope that wasn't the one i just bought? :lol:

LANDROVER DEFENDER INTERCOOLER NISSAN 200SX S13?
Logged
Reply #5August 28, 2007, 12:38:02 am

zagarus

  • Veteran
  • Offline
  • ***
  • 619
Intercooling and fitment
« Reply #5 on: August 28, 2007, 12:38:02 am »
Same place i put mine, 18x6x2.5 i believe is the dimensions on my cooler.



as for piping...



hope that helps a bit.
Logged
Project 1.9TD Jetta Coupe Completed. Back in action!
Reply #6August 28, 2007, 05:12:56 am

nogama3

  • Junior
  • Offline
  • **
  • 162
Intercooling and fitment
« Reply #6 on: August 28, 2007, 05:12:56 am »
Quote from: "numbnuts"
Quote from: "nogama3"
see, i want to do that but dont  have the time or the skills to do that.
looking at various intercoolers that will fit into my mk3 bumper.
found one on ebay that would have fitted easily but got outbid in the dying seconds...


Hope that wasn't the one i just bought? :lol:

LANDROVER DEFENDER INTERCOOLER NISSAN 200SX S13?


the one i was bidding on had previously had it fitted to a nova turbo?
Logged
Pages: [1]
« previous next »