-
wtb mk3 tdi oil filter flange by the4ork on 13 Aug, 2007 19:38
-
i need it for my 1.8t swap...
so i would think it needs to be off an engine with a k03 turbo? i need it to fit my k03s oil line -
#1 by burn_your_money on 13 Aug, 2007 20:15
-
Is it the same as the AAZ ones (which are different then the 1.6 ones)?
-
#2 by RabbitGTDguy on 13 Aug, 2007 20:16
-
Edited... mis info on my part...see the difference below and as mentioned. Starting with MK3/b4 they did change.
Joe -
#3 by burn_your_money on 13 Aug, 2007 20:27
-
I beleive around 1993 VW changed the mounting points of the flange where it attatches to the block. I know that the 1.9 IDI and 1.6 ones are differant. I think the 1.9 ones are the same as the ABA style but I'm not too familiar with gassers
-
#4 by RabbitGTDguy on 13 Aug, 2007 20:39
-
I withdrawl what I said...
http://www.germanautoparts.com/Volkswagen/Rabbit/Engine/147/1
thats a rabbit style flange gasket... basically shows the mounting points... same as the MK2 8v/16v
Here is an MK3 ABA one...
http://www.germanautoparts.com/Volkswagen/Jetta/Engine/147/12
Here is the B4/MK3 TDI one...
http://www.germanautoparts.com/Volkswagen/Passat/Engine/147/5
same as the ABA one...mounting wise.
Top mounting changes slightly...
Plentiful number of ABA flanges out there!
Sorry for the mis-info. Should have dug in a bit more!
Joe -
#5 by burn_your_money on 13 Aug, 2007 20:44
-
The pictures of the ABA/B4 are the same as the 1.9 IDI ones, which I have 2 of
-
#6 by the4ork on 14 Aug, 2007 22:26
-
anyone got any pictures of one? specifically a pic that shows how the oil line connects?
-
#7 by burn_your_money on 15 Aug, 2007 07:33
-
I"ll try and grab some if I go to the garage today