VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Cheesetoast on May 25, 2007, 11:20:54 pm

Title: Blow apart diagram of aneroid pin asembly
Post by: Cheesetoast on May 25, 2007, 11:20:54 pm
i'd like as many pictures of this as i can, i want to make absolutely sure it's back in there right.  is it ok to use the small shorter spring? advantages?  i need to know what if any washers go where, the one i replaced mine with was slightly different.
Title: Blow apart diagram of aneroid pin asembly
Post by: Cheesetoast on May 25, 2007, 11:30:35 pm
the 1.9 pin that was in there had this metal washer, the 1.6 one didn't, i used the shorter spring and this washer. good?

(http://www.supermotors.net/getfile/434902/fullsize/pict1231.jpg)
Title: Blow apart diagram of aneroid pin asembly
Post by: Cheesetoast on May 25, 2007, 11:52:24 pm
do i need this o-ring/gasket?

(http://members.shaw.ca/adowler3/IMG_6832_sml.JPG)

(http://members.shaw.ca/adowler3/IMG_6833_sml.JPG)
Title: Blow apart diagram of aneroid pin asembly
Post by: zagarus on May 26, 2007, 12:20:59 am
u need to use the macro feature on your camera lol :lol:

but i hear you can use the 1.6 pin in place of the 1.9
Title: Blow apart diagram of aneroid pin asembly
Post by: Cheesetoast on May 26, 2007, 01:31:12 am
that is hte macro feature..... really old canon a40
Title: Blow apart diagram of aneroid pin asembly
Post by: zaprzal on May 26, 2007, 01:50:59 am
look at your pin and you will know if you need washer

(http://img142.imageshack.us/img142/8673/rysykt7.jpg)

Quote
that is hte macro feature..... really old canon a40


canon a40 can make good makro
Title: Blow apart diagram of aneroid pin asembly
Post by: jimfoo on May 26, 2007, 05:44:51 am
Quote from: Cheesetoast
the 1.9 pin that was in there had this metal washer, the 1.6 one didn't, i used the shorter spring and this washer. good?

(http://www.supermotors.net/getfile/434902/fullsize/pict1231.jpg)

Dude! That's my pin. It was slready like that when I bought it.  So if other diesels have VE pumps, are there other pumps that have pins like the 1.6, that will fit our pumps?
Title: Blow apart diagram of aneroid pin asembly
Post by: Cheesetoast on May 26, 2007, 09:12:15 am
Quote from: "zaprzal"
look at your pin and you will know if you need washer

(http://img142.imageshack.us/img142/8673/rysykt7.jpg)



um, huh? so if it's the 1.6 pin like that i should use the washer?