VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: goomicoo on June 07, 2015, 10:58:33 am

Title: AAZ Crank timing mark?
Post by: goomicoo on June 07, 2015, 10:58:33 am

I'm doing an AAZ swap into my Vanagon and would like to do the timing belt before I install the engine.
The transmission is not mounted and there is no timing mark on the crank pulley that I know of.
Is there one on the vibration dampener? I can't see any marks on the block to line one up with either  :P
Is there a tool to use on the crank pulley to hold it @ TDC?
Thanks for the help, I'm new to AAZ's  ;D

(http://i90.photobucket.com/albums/k278/68fish/AAZ/IMG_0619_zpsxzfkgxwm.jpg) (http://s90.photobucket.com/user/68fish/media/AAZ/IMG_0619_zpsxzfkgxwm.jpg.html)

Title: Re: AAZ Crank timing mark?
Post by: RunninWild on June 07, 2015, 09:55:14 pm

There should be one on the flywheel. If you haven't taken the belt off already just mark each sprockets location in relation to the block

Title: Re: AAZ Crank timing mark?
Post by: starrd on June 13, 2015, 10:31:20 pm

(http://www.metalnerd.com/images/crank_lock_on_engine.jpg)

tool can be found here: http://www.metalnerd.com/cat03.htm